【BS英国标准】BS EN 137462004 Surfaces for sports areas Determination of dimensional changes due t.doc
《【BS英国标准】BS EN 137462004 Surfaces for sports areas Determination of dimensional changes due t.doc》由会员分享,可在线阅读,更多相关《【BS英国标准】BS EN 137462004 Surfaces for sports areas Determination of dimensional changes due t.doc(11页珍藏版)》请在三一办公上搜索。
1、BRITISH STANDARD BS EN13746:2004Surfaces for sports areas Determination of dimensional changes due to the effect of varied water, frost and heat conditionsThe European Standard EN 13746:2004 has the status of aBritish StandardICS 59.080.60; 97.150; 97.220.10 BS EN 13746:2004National forewordThis Bri
2、tish Standard is the official English language version ofEN 13746:2004.The UK participation in its preparation was entrusted to Technical CommitteePRI/57, Surfaces for sports areas, which has the responsibility to:aid enquirers to understand the text;present to the responsible international/European
3、 committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-re
4、ferencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Briti
5、sh Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.This British Standard was published under the au
6、thority of the Standards Policy and Strategy Committee on30 June 2004 BSI 30 June 2004ISBN 0 580 43997 6Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.The BSI copyright notice displayed in this document indicates when th
7、e document was last issued.Amd. No.DateCommentsAmendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 13746June 2004ICS 59.080.60; 97.150; 97.220.10English versionSurfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost
8、and heat conditionsSols sportifs - Dtermination des variations dimensionnelles dues aux effets de leau, du gel et de la chaleurSportbden - Bestimmung von Manderungen aufgrund wechselnder Einwirkung von Wasser, Frost und WrmeThis European Standard was approved by CEN on 16 April 2004.CEN members are
9、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th
10、e Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same statu
11、s as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,
12、 Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C OM I T EUR OP EN DE NOR M AL I S ATI ON EUR OP I S C HES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved wor
13、ldwide for CEN national Members.Ref. No. EN 13746:2004: EEN 13746:2004 (E)ContentspageForeword.31Scope .42Principle .43Apparatus .44Sampling, preparation of test pieces and conditioning.55Procedure .66Calculation.67Test report .77ForewordThis document (EN 13746:2004) has been prepared by Technical C
14、ommittee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be
15、withdrawn at the latest by December 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu
16、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.1ScopeThis European Standard specifies a method for the determination of the dimensional stability of synthetic turf, textile
17、 surfaces, shock pads and loose-laid synthetic surfaces when subjected to varied water, frost and heat conditions.2PrincipleA comparison between the dimensions in the plane of a test piece parallel and perpendicular to the direction of its manufacture is made before and after it has been subjected t
18、o varied water, frost and heat conditions.3Apparatus3.1Test apparatus3.1.1 Support, to hold the test piece during conditioning and the taking of measurements.3.1.2 Metal plate, with a mass of (15 1) kg/m2, of dimensions along each edge (10 1) mm smaller than the test piece.3.1.3 Instrument with a ga
19、uge, capable of measuring the length of the test piece to the nearest 0,01 mm.Dimensions in millimetresFigure 1 Test apparatus3.2Container, for holding water at (23 2) C, of dimensions at least 20 mm greater than the test piece and deep enough to accommodate the submerged test piece.3.3Deep-freeze,
20、capable of being maintained at a temperature of (-18 2) C, of dimensions at least 20 mm greater than the test piece.3.4Drying oven, with forced ventilation, capable of being controlled at (70 2) C, and having perforated and lacquered shelves.3.5Enclosure for conditioning, capable of providing a stan
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS英国标准 【BS英国标准】BS EN 137462004 Surfaces for sports areas Determination of dimensional changes due BS
链接地址:https://www.31ppt.com/p-5203871.html