BS英国标准BS EN 502851999 家用电灯的能量效率.测量方法 (Energy efficiency of electric lamps for household use .doc

《BS英国标准BS EN 502851999 家用电灯的能量效率.测量方法 (Energy efficiency of electric lamps for household use .doc》由会员分享，可在线阅读，更多相关《BS英国标准BS EN 502851999 家用电灯的能量效率.测量方法 (Energy efficiency of electric lamps for household use .doc（9页珍藏版）》请在三一办公上搜索。

1、BRITISH STANDARDEnergy efficiency of electric lamps for household use Measurement methodsThe European Standard EN 50285:1999 has the status of aBritish StandardICS 29.140.20; 29.140.30| BS EN50285:1999|NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 50285:1999National for

2、ewordThis British Standard is the English language version of EN 50285:1999.The UK participation in its preparation was entrusted to Technical CommitteeCPL/34/1, Lamps, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries

3、on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Stan

4、dards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using theFind facility of the BSI Standards Electronic Catalogue.A British Standard doe

5、s not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside

6、front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover.The BSI copyright notice displayed throughout this document indicates when the document was last issued.Amd. No.DateCommentsThis British Standard, having been prepared under the direction of the ElectrotechnicalSecto

7、r Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 1999BSI 08-1999ISBN 0 580 32829 5Amendments issued since publicationEUROPEAN STANDARDEN 50285NORME EUROPE ENNEEUROPA ISCHE NORMFebruary 1999ICS 29.140.20; 29.140.30Descriptors: electric equip

8、ment, lighting equipment, lamps, measurement, effectiveness, luminous flux, life, electric power measurementEnglish versionEnergy efficiency of electric lamps for household use Measurement methodsEfficience e nerge tique des lampes e lectriques ausage domestique Me thodes de mesureEnergieeffizienz v

9、on elektrischen Lampen fu r denHausgebrauch MeverfahrenThis European Standard was approved by CENELEC on 1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou

10、t any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language m

11、ade by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germa

12、ny, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comite Europe en de Normalisation Electrotechnique Europa isches Komitee fu r Elektrotechnische NormungCentral

13、Secretariat: rue de Stassart 35, B-1050 Brussels1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELECmembers.Ref. No. EN 50285:1999 EPage EN 50285:1999BSI 08-1999ForewordThis European Standard was prepared by theCENELEC Task Force BTTF 85-2, Energy effic

14、iency ofContentsPageelectric lamps for household use, underStandardization Mandate M/202.The text of the draft was submitted to the unique acceptance procedure and was approved by CENELEC as EN 50285 on 1998-08-01.The following dates were fixed: latest date by which the EN has to be implemented at n

15、ational level by publication of an identical national standard or byendorsement (dop) 1999-08-01 latest date by which national standards conflicting with the ENhave to be withdrawn (dow) 1999-08-01Foreword 21Scope 32Normative references 33Definitions 34Test conditions 35Verification 36Requirements 4

16、6.1Luminous flux 46.2Lamp wattage 46.3Lamp life 4Page 3EN 50285:19991 ScopeThis European Standard has been produced under Standardization Mandate M/202 in response to the European Commission Directive implementing Council Directive 92/75/EEC with regard to energy labelling of household lamps. A meth

17、od of classification of lamps according to energy efficiency is given in the Directive and is not a part of this standard.This standard specifies the test conditions and method of measurement of luminous flux, lamp wattage and lamp life as given on a label on the lamp packaging, together with a proc

18、edure for verification of the declared values. Only those parameters that are specific to the above mentioned Directive are included in this standard. All other parameters are included in the relevant lamp performance standards.Lamps covered by this standard are: mains voltage tungsten filament lamp

19、s; mains voltage tungsten halogen lamps; self-ballasted lamps; double-capped fluorescent lamps; single-capped fluorescent lamps.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the app

20、ropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard onlywhen incorporated in it by amendment or revision. For undated references the latest edition of the publi

21、cation referred to applies (including amendments).IEC 60050(845), International ElectrotechnicalVocabulary Chapter 845: Lighting.EN 60064, Tungsten filament lamps for domestic and similar general lighting purposes Performance requirements.(IEC 60064, mod)EN 60081, Double-capped fluorescent lamps Per

22、formance specifications.(IEC 60081)EN 60901, Single-capped fluorescent lamps Performance specifications.(IEC 60901)EN 60969, Self-ballasted lamps for general lighting services Performance requirements.(IEC 60969)CIE 84, The measurement of luminous flux.3 DefinitionsFor the purpose of this European S

23、tandard the definitions given in the normative references apply, together with the following.3.1average lifenumber of operating hours after which 50 % of a representative group of lamps have survived, when operated under specified test conditions (life to 50 % lamp failure). For tungsten filament la

24、mps average life is defined as the mean value of the truncated life distribution as specified in EN 60064.3.2rated average lifethe average life declared by the manufacturer or responsible vendorNOTE The rated average life is not necessarily the average of all individual lamp lives. It may only be us

25、ed for comparison, since operating conditions in practice may differ from the specified conditions used in life testing.3.3lamp failurefailure of a lamp to light up, or to meet the starting requirements of the relevant lamp standard or to remain alight4 Test conditionsLamps shall be tested in accord

26、ance with the relevant clauses of the standards listed below.For tungsten filament lamps: EN 60064.For tungsten halogen lamps: EN 60064 (the accelerated life test does not apply).For self-ballasted lamps: EN 60969. For double-capped fluorescentlamps: EN 60081.For single-capped fluorescentlamps: EN 6

27、0901.For the measurement of the luminous flux CIE 84 also applies.5 VerificationThe minimum sample size shall be twenty lamps. The sample shall be representative of a manufacturers production. This can be achieved by randomly selecting lamps from at least four different points of sale.The results of

28、 the tests shall comply with the requirements given in 6.1 to 6.3. If the test results do not comply with these requirements, the manufacturers test records shall be requested.BSI 08-1999Page EN 50285:1999BSI 08-19996 Requirements6.1 Luminous fluxLamp typeAverage luminous flux min.lmAverage lamp wat

29、tage max.WTungsten filament(GLS)95 %104 %Tungsten halogen90 %108 %Self-ballasted95 %110 %Double-capped fluorescent95 %105 %*Single-capped fluorescent95 %105 %* The average maximum lamp wattage is related to the rated value as given on the lamp data sheets. There may be a difference between the rated

30、 and nominal values (see relevant standard).The average value of the initial readings of the luminous flux of the sample shall be not less than the percentage of the declared value, given in Table 1.6.2 Lamp wattageThe average value of the initial readings of the lamp wattage of the sample shall not

31、 exceed the percentage of the declared value, given in Table 1.6.3 Lamp lifeFor tungsten filament lamps the average life of the sample , i.e. the mean value of the truncated life distribution as defined in EN 60064, shall be not less than 90 % of the declared value.For other lamp types the average l

32、ife of the sample, i.e. life to 50 % lamp failure, shall be not less than 90 % of the declared value.Table 1 Percentages of the declared values to be achieved for average luminous flux and average lamp wattageblankBS EN|50285:1999BSI389 Chiswick High RoadLondonW4 4AL| BSI British Standards Instituti

33、on| BSI is the independent national body responsible for preparing British Standards. It| presents the UK view on standards in Europe and at the international level. It is| incorporated by Royal Charter.| Revisions| British Standards are updated by amendment or revision. Users of British Standards|

34、should make sure that they possess the latest amendments or editions.| It is the constant aim of BSI to improve the quality of our products and services. We| would be grateful if anyone finding an inaccuracy or ambiguity while using this| British Standard would inform the Secretary of the technical

35、committee responsible,| the identity of which can be found on the inside front cover. Tel: 020 8996 9000.| Fax: 020 8996 7400.| BSI offers members an individual updating service called PLUS which ensures that| subscribers automatically receive the latest editions of standards.| Buying standards| Ord

36、ers for all BSI, international and foreign standards publications should be| addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.| In response to orders for international standards, it is BSI policy to supply the BSI| implementation of those that have been published as British Sta

37、ndards, unless| otherwise requested.| Information on standards| BSI provides a wide range of information on national, European and international| standards through its Library and its Technical Help to Exporters Service. Various| BSI electronic information services are also available which give deta

38、ils on all its| products and services. Contact the Information Centre. Tel: 020 8996 7111.| Fax: 020 8996 7048.| Subscribing members of BSI are kept up to date with standards developments and| receive substantial discounts on the purchase price of standards. For details of| these and other benefits

39、contact Membership Administration. Tel: 020 8996 7002.| Fax: 020 8996 7001.| Copyright| Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of| the publications of the international standardization bodies. Except as permitted| under the Copyright, Designs and Patents

40、 Act 1988 no extract may be reproduced,| stored in a retrieval system or transmitted in any form or by any means electronic,| photocopying, recording or otherwise without prior written permission from BSI.| This does not preclude the free use, in the course of implementing the standard, of| necessar

41、y details such as symbols, and size, type or grade designations. If these| details are to be used for any other purpose than implementation then the prior| written permission of BSI must be obtained.| If permission is granted, the terms may include royalty payments or a licensing| agreement. Details and advice can be obtained from the Copyright Manager.| Tel: 020 8996 7070.| | |国内外标准大全豆丁网国内外标准下载地址