【BS英国标准】BS EN 613472112002 Lamp controlgear — .doc

《【BS英国标准】BS EN 613472112002 Lamp controlgear — .doc》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 613472112002 Lamp controlgear — .doc（13页珍藏版）》请在三一办公上搜索。

1、BRITISH STANDARD BS EN61347-2-11:2002IEC61347-2-11:2001Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminairesThe European Standard EN 61347-2-11:2001 has the status of aBritish StandardICS 29.140.40-,-NO COPYING WITHOUT BSI PERMISSION EXCEPT AS

2、 PERMITTED BY COPYRIGHT LAWCopyright European Committee for Electrotechnical StandardizationProvided by IHS under license with CENELECNo reproduction or networking permitted without license from IHSNot for ResaleBS EN 61347-2-11:2002National forewordThis British Standard is the official English lang

3、uage version ofEN 61347-2-11:2001. It is identical with IEC 61347-2-11:2001 includingCorrigendum 1:2001.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and related equipment, to Subcommittee CPL/34/3, Auxilliaries, which has the responsibility to:aid enquir

4、ers to understand the text;present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this

5、subcommittee can be obtained on request to its secretary.From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications

6、may contain identifiers from both systems.Cross-referencesThe British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the B

7、SI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.This Brit

8、ish Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on7 March 2002 BSI 7 March 2002ISBN 0 580 39047 0Summary of pagesThis document comprises a front cover

9、, an inside front cover, the EN title page,pages 2 to 8, an inside back cover and a back cover.The BSI copyright date displayed in this document indicates when the document was last issued.Amd. No.DateCommentsAmendments issued since publication -,- EUROPEAN STANDARDEN 61347-2-11NORME EUROPENNEEUROPI

10、SCHE NORMAugust 2001ICS 29.140.99English versionLamp controlgearPart 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires(IEC 61347-2-11:2001)Appareillages de lampesPartie 2-11: Prescriptions particulires pour circuits lectroniques divers utiliss avec les luminair

11、es(CEI 61347-2-11:2001)Gerte fr LampenTeil 2-11: Besondere Anforderungen an elektronische Module fr Leuchten(IEC 61347-2-11:2001)This European Standard was approved by CENELEC on 2001-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

12、for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three offi

13、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical commi

14、ttees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electr

15、otechnique Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61347-2-11:2001 E-,-Page 2EN 61347211:2001The text of docume

16、nt 34C/528/FDIS, future edition 1 of IEC 61347-2-11, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC- CENELEC parallel vote and was approved by CENELEC as EN 61347-2-11 on 2001-07-01.The following dates were fixed: latest date by which t

17、he EN has to be implemented at national level by publication of an identicalnational standard or by endorsement(dop) 2002-04-01 latest date by which the national standards conflictingwith the EN have to be withdrawn(dow) 2004-07-01This standard shall be used in conjunction with EN 61347-1:2001.NOTE

18、In this standard, the following print types are used:- requirements : in roman type;- test specifications: in italic type;-,- notes: in smaller roman type.Annexes designated normative are part of the body of the standard. In this standard, annex ZA is normative.Annex ZA has been added by CENELEC.End

19、orsement noticeThe text of the International Standard IEC 61347-2-11:2001 was approved by CENELEC as aEuropean Standard without any modification. BSI 7 March 2002Copyright European Committee for Electrotechnical StandardizationProvided by IHS under license with CENELECNo reproduction or networking p

20、ermitted without license from IHSNot for ResalePage 3EN 61347211:2001CONTENTSINTRODUCTION . 4 1Scope . 52Normative references. 53Definitions . 54General requirements . 55General notes on tests . 65.1Number of specimens . 6-,-6Classification . 67Marking . 67.1Mandatory marking . 67.2Information to be

21、 provided, if applicable . 68Protection against accidental contact with live parts . 69Terminals. 610 Provisions for earthing . 711 Moisture resistance and insulation . 712 Electric strength . 713 Thermal endurance for windings . 714 Fault conditions . 715 Construction . 716 Creepage distances and c

22、learances . 717 Screws, current-carrying parts and connections . 718 Resistance to heat, fire and tracking . 719 Resistance to corrosion . 720 Annexes . 7Annex ZA ( normative) Normative references to international publications with theircorresponding European publications . 8Copyright EuBropSeaIn 7C

23、omMmiatterecfohr El2ec0tro0te2chnical StandardizationProvided by IHS under license with CENELECNo reproduction or networking permitted without license from IHSNot for ResalePage 4EN 61347211:2001INTRODUCTIONThis first edition of IEC 61347-2-11 is published in conjunction with IEC 61347-1. The format

24、ting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized.This standard, and the parts which make up IEC 61347-2, in referring to any of the clauses of IEC 61347-1, specify the extent to

25、which such a clause is applicable and the order in which the tests are to be performed; they also include additional requirements, as necessary. All parts which make up IEC 61347-2 are self-contained and, therefore, do not include references to each other.-,-W here the requirements of any of the cla

26、uses of IEC 61347-1 are referred to in this standard by the phrase The requirements of clause n of IEC 61347-1 apply, this phrase is interpreted as meaning that all requirem ents of the clause in question of part 1 apply, except any which are clearly inapplicable to the specific type of lamp control

27、gear covered by this particular part of IEC 61347-2.Copyright European Committee for Electrotechnical Standardization BSI 7 March 2002Page 5EN 61347211:2001LAMP CONTROLGEAR Part 2-11: Particular requirements formiscellaneous electronic circuits used with luminaires1ScopeThis part of IEC 61347 specif

28、ies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 250 V. This part does not apply to circuits or devices for which specific IEC standards are published.NOTE Examples of mi

29、scellaneous electronic circuits used with luminaires are electronic ballast control circuits; switching circuits used in association with daylight and/or presence sensors; circuits to assist EMC performance; intermittence and similar devices used with lighting chains;-,- earth leakage or open-circui

30、t protective devices used with neon transformers.2Normative referencesFor the purpose of this part of IEC 61347, the normative references given in clause 2 ofIEC 61347-1 which are mentioned in this standard apply.IEC 61347-1:2000, Lamp controlgear Part 1: General and safety requirements3DefinitionsF

31、or the purpose of this part of IEC 61347, the definitions of clause 3 of IEC 61347-1 apply together with the following.3.1miscellaneous electronic circuits used with luminaireselectronic circuits for use with a luminaire. The circuit may assist the functioning of the lamp controlgear and/or provide

32、additional functions for the luminaire such as switching or circuit monitoringNOTE Electronic circuits covered by their own IEC standards are not included in this definition.4General requirementsThe requirements of clause 4 of IEC 61347-1 apply.Copyright EuBropSeaIn 7ComMmiatterecfohr El2ec0tro0te2c

33、hnical StandardizationPage 6EN 61347211:20015General notes on testsClause 5 of IEC 61347-1 is applicable with the following addition:5.1Number of specimensThe following number of specimens shall be submitted for testing:1 unit for the tests of clauses 6 to 13 and clauses 15 to 19;1 unit for the test

34、s of clause 14, fault conditions (additional units or components, where necessary, may be required in consultation with the manufacturer).6ClassificationThe requirements of clause 6 of IEC 61347-1 apply.7MarkingMiscellaneous electronic circuits that form an integral part of the luminaire need not be

35、 marked.-,-7.1Mandatory markingMiscellaneous electronic circuits, other than integral, shall be clearly and durably marked with the following mandatory markings in accordance with the requirements of 7.1 of IEC 61347-1:Items a), b), d), e), f), k) and l) of 7.1 of IEC 61347-1 together with:for contr

36、ollable circuits, the control terminals shall be identified;for miscellaneous circuits classified independent, the marking of ta rating is considered an acceptable alternative to the marking of tc rating.The requirements of 7.2 of IEC 61347-1 shall be satisfied.7.2Information to be provided, if applicableIn addition to the above mandatory markings, the following information, if applicable, shall be given either on the miscellaneous electronic circuit, or be made available in the manufacturers catalogue or the like.Items h), i) and j) given in 7.1 of IEC 61347-1.The requirements of 7.2 of IEC