【UL标准】UL 8142001 GasTubeSign and Ignition Cable.doc

《【UL标准】UL 8142001 GasTubeSign and Ignition Cable.doc》由会员分享，可在线阅读，更多相关《【UL标准】UL 8142001 GasTubeSign and Ignition Cable.doc（32页珍藏版）》请在三一办公上搜索。

1、UL 814ISBN 1-55989-931-XGas-Tube-Sign and IgnitionCableThis PDF Standard downloaded from APRIL 17, 2001 UL 814tr1Underwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Gas-Tube-Sign and Ignition Cable, UL 814Tenth Edition, Dated October 31, 1995Revis

2、ions: This Standard contains revisions through and including April 17, 2001.Announcement Bulletin(s): This Standard contains the announcement bulletin(s) dated August 27, 1999. Text that has been changed in any manner is marked with a vertical line in the margin. Changes inrequirements are marked wi

3、th a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective.The new and/or revised requirements are substantially in accordance with ULs Bulletin(s) on this subject dated October 13, 200

4、0 and March 29, 1999. The bulletin(s) is now obsolete and may be discarded.The revisions dated April 17, 2001 include a reprinted title page (page1) for this Standard.As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the n

5、ote on the title page of this Standard outlining the procedures to be followed to retain the approved text of this ANSI/UL Standard.The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the

6、 requirements for that product and service, or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distributi

7、on diskette should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in a

8、ny form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions.UL provides this Standa

9、rd as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, los

10、t savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard

11、, regardless of the form of the claim.APRIL 17, 2001 UL 814tr3This PDF Standard downloaded from UL will attempt to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve e

12、very support request. UL supports the electronic versions of its Standards only if they are used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-time without notification.UL reserves the right to change the format, presentation, file

13、types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, cl

14、aim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard

15、 disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access.If a multiple-user versio

16、n electronic Standard was purchased, one copy of the Standard may be stored on a single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are i

17、ntended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multip

18、le-user version of an electronic Standard. Because of differences in the computer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organ

19、ization purchasing a UL Standard can make a copy of the page or pages being viewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures, and/or other elements of the Standard having future effecti

20、ve dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future eff

21、ective date will be judged under all of the requirements in this Standard including those requirements with a specified future effective date, unless the applicant specifically requests that the product be judged under the current requirements. However, if the applicant elects this option, it should

22、 be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing and Follow-Up Services after the effective date, and understanding of this should be signified in writing.Copyright 1974, 2001 Underwriters Laboratories Inc.This Standard consist

23、s of pages dated as shown in the following checklist:PageDate1-3. April 17, 20014 . October 31, 19955 . December 1, 20006-12 . April 17, 200113 . March 19, 199914-14B . December 1, 200015-16 . April 17, 2001trAPRIL 17, 2001 UL 814This PDF Standard downloaded from No Text on This PageOCTOBER 31, 1995

24、(Title Page Reprinted: April 17, 2001)ANSI/UL 814-20001UL 814Gas-Tube-Sign and Ignition CableFirst Edition January, 1936Second Edition February, 1943Third Edition October, 1948Fourth Edition January, 1966Fifth Edition March, 1969Sixth Edition October, 1974Seventh Edition December, 1978Eighth Edition

25、 July, 1982Ninth Edition April, 1987Tenth EditionOctober 31, 1995The most recent designation of ANSI/UL 814 as an American National Standard occurred on June 28, 2000.This ANSI/UL Standard for Safety is under periodic maintenance, whereby the ANSI approval is updated approximately every five years.

26、The Tenth edition (and revisions dated December 1, 2000) is ANSI approved, other revisions are not part of the ANSI designated text. To obtain a copy of the originally approved ANSI version of the Standard, contact comm 2000 at m-.An effective date included as a note immediately following certain re

27、quirements is one established by Underwriters Laboratories Inc and is not part of the ANSI approved standard.Approved as ANSI/UL 814-2000, June 28, 2000Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it inco

28、rporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements.ISBN 1-55989-931-XCOPYRIGHT 1974, 2001 UNDERWRITERS LABORATORIES INC.APRIL 17, 2001GAS-TUBE-SIGN AND IGNITION CABLE - UL 8143This PDF Standard dow

29、nloaded from No Text on This PageCONTENTSFOREWORD . .4INTRODUCTION1 Scope . .52 References . .53 Units of Measurement . .54 Materials . .65 Conductors . .65.1 Materials and sizes . .65.2 Metal coating . .8A5.3 Separator . .8A6 Insulation . .8B7 Jacket . .8B7.1 General . .8B7.2 Additional metal . .8C

30、PERFORMANCE8 Physical Properties Tests . .8C9 Routine Voltage Application Test . .8C9A Voltage Application at Elevated Temperature . .8D10 Extended Voltage Application Test . .8D11 Extended Voltage Application After Immersion Test . .1012 Surface Leakage Test . .1013 Test for Dripping of Compounds .

31、 .1114 Flame Test . .1114A Sunlight Resistance . .1214B Cold Bend . .1214C Ozone Exposure Test . .1314C.1 General . .1314C.2 Specimens . .1314C.3 Apparatus . .1314C.4 Method . .1314D U-Bend Test . .1314D.1 General . .1314D.2 Apparatus . .1414D.3 Specimen . .1414D.4 Procedure . .1414D.5 Examination .

32、 .14MARKINGS15 Details for Conductors . .1416 Information on the Cable . .1517 Information on the Tag, Reel, or Carton . .1618 Date of Manufacture . .16DECEMBER 1, 2000GAS-TUBE-SIGN AND IGNITION CABLE - UL 8145This PDF Standard downloaded from FOREWORDA. This Standard contains basic requirements for

33、 products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field experience, and an

34、 appreciation of the problems of manufacture, installation, and use derived from consultation with and information obtained from manufacturers, users, inspection authorities, and others having specialized experience. They are subject to revision as further experience and investigation may show is ne

35、cessary or desirable.B. The observance of the requirements of this Standard by a manufacturer is one of the conditions of the continued coverage of the manufacturers product.C. A product which complies with the text of this Standard will not necessarily be judged to comply with the Standard if, when

36、 examined and tested, it is found to have other features which impair the level of safety contemplated by these requirements.D. A product employing materials or having forms of construction which conflict with specific requirements of the Standard cannot be judged to comply with the Standard. A prod

37、uct employing materials or having forms of construction not addressed by this Standard may be examined and tested according to the intent of the requirements and, if found to meet the intent of this Standard, may be judged to comply with the Standard.E. UL, in performing its functions in accordance

38、with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is p