【AS澳大利亚标准】AS NZS 31602001 Amdt 12005 Approval and Test SpecificationHandheld Portable Elec.doc

《【AS澳大利亚标准】AS NZS 31602001 Amdt 12005 Approval and Test SpecificationHandheld Portable Elec.doc》由会员分享，可在线阅读，更多相关《【AS澳大利亚标准】AS NZS 31602001 Amdt 12005 Approval and Test SpecificationHandheld Portable Elec.doc（4页珍藏版）》请在三一办公上搜索。

1、Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 12 Mar 2007AS/NZS 3160/AMD 1/2005-06-17STANDARDS AUSTRALIA/STANDARDS NEW ZEALANDAmendment No. 1 toAS/NZS 3160:2001Approval and test specification - Hand-held portable electric toolsREVISED TEXTThe 2001 edition of AS/NZS 3160 is amended as follows; the ame

2、ndments should be inserted in the appropriate places.SUMMARY:This amendment applies to Clause 1, 3, 5, 11.2.3, 11.2.4, 11.2.5, 16 and 18.2. Published on 17 June 2005Approved for publication in Australia on behalf of the Council of Standards Australia on 21 March 2005Approved for publication in New Z

3、ealand by the Standards Council of New Zealand on 1 April 2005All parts of this amendment take effect from the date of publication.1ScopeAdd the following paragraph.This standard will not apply to hand-held motor-operated electric tools within the scope of theAS/NZS 60745 series of standards after t

4、he dates specified in the parts 2 of that series.3REFERENCED DOCUMENTSDelete reference to AS 1788.Replace the title of AS 1788.1 by “Abrasive wheels Design, construction and safeguarding”Delete reference to AS 1895.Replace the reference to AS 1939 by “60529 Degrees of protection provided by enclosur

5、es(IP code)”.Replace the reference to AS 2726 by “2726.1 Chainsaws Safety requirements Chainsaws for general use”Insert the following immediately above the reference to 61558.2.4AS/NZS60320.1Appliance couplers for household and similar general purposes Part 1: General requirementsISBN 0 7337 6602 1A

6、ccessed by UNIVERSITY OF SOUTH AUSTRALIA on 12 Mar 2007Delete reference to AS/NZS 3108 and the associated footnote. Delete reference to 3109 and 3109.1.5Mechanical guardingReplace the third paragraph by the following.Chainsaws shall be fitted with a chain-brake facility that shall have characteristi

7、cs complying with those given in Clause 7.1 of AS 2726.1.Replace the last note by the following.NOTE Reference should be made to the Australian Standards for guarding and safe use of portable electric tools, namely AS 1473 for woodworking machinery, and AS 1788.1, for abrasive wheels, as appropriate

8、.11.2.3Residual current devicesIn item (i) replace “1939” by “60529”11.2.4Isolating transformersDelete “AS/NZS 3108 or” and the associated footnote. Replace “1939” by “60529”11.2.5Means of connectionReplace “AS/NZS 3109.1” by “AS/NZS 60320.1”.16SWITCHES AND SPEED CONTROL DEVICESReplace item (vi) by the following.(vi) Concrete cutters, masonry cutters and ceramic cutters used with wheels of 130mm dia. or greater.18.2ConditioningIn item (b) replace “1939” by “60529”.Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 12 Mar 2007This page has been left blank intentionally.国内外标准大全豆丁网国内外标准下载地址