【BS标准word原稿】BS EN 1239052000 Testing hardened concrete. Flexural strength of test specimens.doc

《【BS标准word原稿】BS EN 1239052000 Testing hardened concrete. Flexural strength of test specimens.doc》由会员分享，可在线阅读，更多相关《【BS标准word原稿】BS EN 1239052000 Testing hardened concrete. Flexural strength of test specimens.doc（17页珍藏版）》请在三一办公上搜索。

1、豆丁网：Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSIBRITISH STANDARD BS EN12390-5:2000IncorporatingCorrigendum No. 1Testing hardened concrete Part 5: Flexural strength of test specimensThe European Standard EN 12390-5:2000 has the status of aBritish StandardICS 91.100.30 BS EN 12

2、390-5:2000National forewordThis British Standard is the official English language version ofEN 12390-5:2000, including Corrigendum September 2004. It will supersedeBS 1881-118:1983, which will be withdrawn in 2003 when the full package of concrete standards is available.The UK participation in its p

3、reparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/1, Concrete production and testing, which has the responsibility to:aid enquirers to understand the text;present to the responsible international/European committee any enquiries on the interpretation, or proposal

4、s for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement internatio

5、nal or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to

6、 include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSIThis British Standard, having been p

7、repared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on15 December 2000 BSI 2 November 2004ISBN 0 580 36605 7Summary of pagesThis document comprises a front cover, an inside front co

8、ver, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amd. No.DateComments15438Corrigendum No. 12 November 2004Correction to Subclause 6.2Amendments issued since publicationEUROPEAN

9、STANDARD NORME EUROPENNEEUROPISCHE NORMEN 12390-5October 2000ICS 91.100.30Incorporating corrigendum September 2004English versionTesting hardened concrete - Part 5: Flexural strength of test specimensEssai pour bton durci - Partie 5: Rsistance la flexion sur prouvettesPrfung von Festbeton - Teil 5:

10、Biegezugfestigkeit vonProbekrpernThis European Standard was approved by CEN on 18 February 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

11、ate lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

12、esponsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Ne

13、therlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NO R M AL I S ATI O N EUR O P I S C H ES KOM I T EE F R N O R M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed copy:PONTYPRIDD COLLEGE, 05/06/

14、2007, Uncontrolled Copy, BSI 2000 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 12390-5:2000 EPage 3EN 12390-5:2000Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSIContentsPageForeword . 31Scope . 32Normative ref

15、erences. 43Principle. 44Apparatus . 45Test specimens. 46Procedures . 57Expression of results . 68Test report . 69Precision. 7Annex A (normative) Loading by a centre-point load . 8Figure 1 Arrangement of loading of test specimen (two-point loading). 7Figure 2 Arrangement of loading of test specimen (

16、centre-point loading) . 7Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSIForewordThis European Standard has been prepared by Technical Committee CEN/TC 104, Concrete (performance, production, placing and compliance criteria), the Secretariat of which is held by DIN.This European

17、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2001, and conflicting national standards shall be withdrawn at the latest by December 2003.According to the CEN/CENELEC Internal Regulations, the national s

18、tandards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.This stan

19、dard is one of a series concerned with testing concrete.It is based on the International Standard ISO 4013 - Concrete - Determination of flexural strength of test specimens.It is recognized good practice to include measurement of density prior to the determination of flexural strength, as a check on

20、 compaction of the concrete.The two-point method of loading has been taken as the reference method, but the use of centre-point loading has been included as a normative annex. An inter-comparison of the two-point and the centre-point methods has been made as part of a test programme, part-funded by

21、the EC under the Measurement and Testing Programme, contract MAT I-CT-94-CO43. The centre-point method gave results which were consistently 13 % higher than those from the two-point method.A draft for this standard was published in 1996 for CEN enquiry as prEN 12359. It was one of a series of indivi

22、dually numbered test methods for fresh or hardened concrete. For convenience it has now been decided to combine these separate draft standards into three new standards with separate parts for each method, as follows:-Testing fresh concrete (EN 12350)-Testing hardened concrete (EN 12390)-Testing conc

23、rete in structures (EN 12504)The series prEN 12390 includes the following parts where the brackets give the numbers under which particular test methods were published for CEN enquiry:EN 12390 - Testing hardened concrete -Part 1: Shape, dimensions and other requirements of specimens and moulds (forme

24、r prEN 12356:1996) Part 2: Making and curing specimens for strength tests (former prEN 12379:1996)Part 3: Compressive strength of test specimens (former prEN 12394:1996)Part 4: Compressive strength - Specification for testing machines (former prEN 12390:1996) Part 5: Flexural strength of test specim

25、ens (former prEN 12359:1996)Part 6: Tensile splitting strength of test specimens (former prEN 12362:1996) Part 7: Density of hardened concrete (former prEN 12363:1996)Part 8: Depth of penetration of water under pressure (former prEN 12364:1996)1 ScopeThis standard specifies a method for the determin

26、ation of the flexural strength of specimens of hardened concrete.Page 5EN 12390-5:2000Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSI2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. These normative refer

27、ences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the

28、latest edition of the publication referred to applies (including amendments).EN 12350-1, Testing fresh concrete Part 1: Sampling.EN 12390-1:2000, Testing hardened concrete Part 1: Shape, dimensions and other requirements of specimens and moulds.EN 12390-2, Testing hardened concrete Part 2: Making an

29、d curing specimens for strength tests.EN 12390-4, Testing hardened concrete Part 4: Compressive strength Specification for testing machines.3 PrinciplePrismatic specimens are subject to a bending moment by the application of load through upper and lower rollers. The maximum load sustained is recorde

30、d and the flexural strength is calculated.4 Apparatus4.1 Testing machineThe test shall be carried out using a testing machine conforming to prEN 12390-4.4.2 Force applicationThe device for applying loads (see Figure 1) shall consist of: two supporting rollers; two upper rollers carried by an articul

31、ated cross member, which divides the load applied by the machine equally between the two rollers.All rollers shall be manufactured from steel and shall have a circular cross-section with a diameter of 20 mm to40 mm. They shall be at least 10 mm longer than the width of the test specimen.Three roller

32、s, including the two upper ones, shall be capable of rotating freely around their axis and of being inclined in a plane normal to the longitudinal axis of the test specimen.The distance, l, between the outer rollers (i.e. the span) shall be equal to 3d, where d is the width of the specimen. The dist

33、ance between the inner rollers shall be equal to d. The inner rollers shall be equally spaced between the outer rollers as shown in Figure 1. All rollers shall be adjusted to the positions illustrated in Figure 1 to an accuracy of2,0 mm.5 Test specimens5.1 GeneralThe test specimens shall be prisms c

34、onforming to EN 12390-1. Specimens cast in moulds shall conform toEN 12350-1 and EN 12390-2. The direction of casting shall be identified on the specimen. Sawn specimens which meet the requirements of EN 12390-1 may also be tested.The specimens shall be examined and any abnormalities observed shall

35、be reported.Licensed copy:PONTYPRIDD COLLEGE, 05/06/2007, Uncontrolled Copy, BSI5.2 Adjustment of test specimensWhere the dimensions or shapes of test specimens do not conform to 4.3 of EN 12390-1 because they exceed the respective tolerances, they shall be rejected or adjusted as follows: uneven su

36、rfaces shall be levelled by grinding; the deviation of angles shall be corrected by cutting and/or grinding.6 Procedures6.1 Preparation and positioning of specimensFor specimens stored in water, wipe excess moisture from the surface of the specimen before placing in the testing machine.Wipe clean al

37、l testing machine bearing surfaces and remove any loose grit or other extraneous material from the surfaces of the specimen that will be in contact with the rollers.Place the test specimen in the machine, correctly centred and with the longitudinal axis of the specimen at right angles to the longitu

38、dinal axis of the upper and lower rollers.Ensure that the reference direction of loading is perpendicular to the direction of casting of the specimen.NOTE The test result may be affected by the direction of loading with respect to the direction of casting.6.2 LoadingDo not apply the load until all l

39、oading and supporting rollers are resting evenly against the test specimen.Select a constant rate of stress within the range 0,04 MPa/s (N/mm.s) to 0,06 MPa/s (N/mm.s). Apply the load without shock and increase continuously, at the selected constant rate 10 %, until no greater load can be sustained.

40、NOTE The required loading rate on the testing machine is given by the formula:2s d1 d 2R =lwhere:Ris the required loading rate, in newtons per second;sis the stress rate, in megapascals per second (newtons per square millimetre per second);d1 and d2are the lateral dimensions of the specimen, in millimetres;lis the spacing of the lower rollers, in millimetres.When using manually controlled testing machines, correc