System generator如何与MATLAB进行匹配？.doc

《System generator如何与MATLAB进行匹配？.doc》由会员分享，可在线阅读，更多相关《System generator如何与MATLAB进行匹配？.doc（17页珍藏版）》请在三一办公上搜索。

1、System generator如何与MATLAB进行匹配？system generator是xilinx公司的系统级建模工具，它是扩展mathworks公司的MATLAB下面的simulink平台，添加了XILINX FPGA专用的一些模块。加速简化了FPGA的DSP系统级硬件设计。但是对于初学者来说，不知道什么版本的matlab和什么版本的sytem generator相匹配,以及如何将他们关联在一起？让我来告诉你吧！For System Generator for DSP Release Notes and Known Issues, see(Xilinx Answer 29595).版

2、本匹配：OperaTIng System Support:Windows 7 ProfessionalWindows XP ProfessionalWindows Server 2008Red Hat Enterprise6 WorkstaTIonRed Hat Enterprise5 WorkstaTIonSUSE Linux Enterprise11Support for 32-bit and 64-bit on all OSRequired:OpTIonal:Synopsys Synplify Pro H-2013.03Mentor Graphics ModelSim 10.1bSyst

3、em Generator for DSP 14.5Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalWindows Server 2008Red Hat Enterprise6 WorkstationRed Hat Enterprise5 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 14.5 System EditionMATLAB 2012a and 20

4、12b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:Synopsys Synplify Pro H-2013.03Mentor Graphics ModelSim 10.1bSystem Generator for DSP 14.4 and Vivado System Generator 2012.4Operating System Support:Windows 7 ProfessionalWindows XP Profession

5、alRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 14.4 System EditionMATLAB R2011a, R2011b, 2012a and 2012b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 b

6、its)Optional:Synopsys Synplify Pro F-2011.12Mentor Graphics ModelSim 10.1aSystem Generator for DSP 14.3 and Vivado System Generator 2012.3Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4 WorkstationSUSE Linux EnterpriseSupport

7、 for 32-bit and 64-bit on all OSRequired:ISE Design Suite 14.3 System EditionMATLAB R2011a, R2011b, 2012a and 2012b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:Synopsys Synplify Pro F-2012.03-SP1Mentor Graphics ModelSim 10.1aSystem Generator

8、 for DSP 14.2Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 14.2 System EditionMATLAB R2011a, R2011b and 2012afrom the MathWork

9、s (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:Synopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSim 10.1aSystem Generator for DSP 14.1Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4

10、 WorkstationSUSE Linux EnterprizeSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 14.1 System EditionMATLAB R2011a and R2011bfrom the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:Synopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSi

11、m 10.1aSystem Generator for DSP 13.4Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 13.4 Logic EditionMATLAB R2011a and Beta sup

12、port for R2011b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:ISE Design Suite 13.4 - Embedded/System EditionsSynopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSim 6.6dSystem Generator for DSP 13.3Operating System Support:Windows 7 Profess

13、ionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enterprise 4 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 13.3 Logic EditionMATLAB R2010a, R2010b, or R2010bSP1 and R2011a from the MathWorks (requires Simulink Fixed-Point Toolbox

14、 for bus-widths greater than 53 bits)Optional:ISE Design Suite 13.3 - Embedded/System EditionsSynopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSim 6.6dSystem Generator for DSP 13.2Operating System Support:Windows 7 ProfessionalWindows XP ProfessionalRed Hat Enterprise 5 WorkstationRed Hat Enter

15、prise 4 WorkstationSUSE Linux EnterpriseSupport for 32-bit and 64-bit on all OSRequired:ISE Design Suite 13.2 Logic EditionMATLAB R2010a, R2010b, or R2010bSP1 from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:ISE Design Suite 13.2 - Embedded/Syste

16、m EditionsSynopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSim 6.6dBeta support is provided for MATLAB 2011aSystem Generator for DSP 13.1Operating System Support:Windows 7Windows XPWindows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1Support for 32-bit and 64-bit on all OSRequired:ISE

17、Design Suite 13.1 Logic EditionMATLAB R2010a or R2010b from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:ISE Design Suite 13.1 - Embedded/System EditionsBeta support is provided for MATLAB 2011aSynopsys Synplify Pro E-2010.09-1Mentor Graphics Mode

18、lSim 6.6dSystem Generator for DSP 12.4Operating System Support:Windows XPWindows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1Support for 32-bit and 64-bit on all OSRequired:ISE Design Suite 12.4 Logic EditionMATLAB R2010a or R2010b from the MathWorks (requires Simulink Fixed-Point Toolbox

19、for bus-widths greater than 53 bits)Optional:ISE Design Suite 12.4 - Embedded/System EditionsSynopsys Synplify Pro E-2010.09-1Mentor Graphics ModelSim 6.5cSystem Generator for DSP 12.3Operating System Support:Windows XPWindows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1Support for 32-bit

20、and 64-bit on all OSRequired:ISE Design Suite 12.3 Logic EditionMATLAB R2009b or R2010a from the MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)Beta support for MATLAB 2010bOptional:ISE Design Suite 12.3 - Embedded/System EditionsSynopsys Synplify Pro E-2010.09-

21、1Mentor Graphics ModelSim 6.5cSystem Generator for DSP 12.2Operating System Support:Windows XPWindows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1Support for 32-bit and 64-bit on all OSRequired:ISE Design Suite 12.2 Logic EditionMATLAB R2009b or R2010a from the MathWorks (requires Simulink

22、 Fixed-Point Toolbox for bus-widths greater than 53 bits)Optional:ISE Design Suite 12.2 - Embedded/System EditionsSynopsys Synplify Pro D-2010.03Mentor Graphics ModelSim 6.5cSystem Generator for DSP 12.1Operating System Support:Windows XPWindows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1

23、* Support for 32-bit and 64-bit on all OSRequired:ISE Design Suite 12.1 Logic EditionMATLAB R2009a or R2009b from the MathWorksOptional:ISE Design Suite 12.1 - Embedded/System EditionsSynopsys Synplify Pro D-2010.03Mentor Graphics ModelSim 6.5cSystem Generator for DSP and AccelDSP 11.4/11.5Operating

24、 System Support:System Generator and AccelDSPWindows XPSystem Generator only:Windows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10.1Required:ISE Design Suite 11.4 Logic EditionMATLAB R2008a R2008b, R2009a or R2009b from The MathWorksOptional:ISE Design Suite 11.4 - Embedded/System EditionsSyn

25、opsys Synplify Pro 8.9Mentor Graphics ModelSim 6.4bSystem Generator for DSP and AccelDSP 11.3Operating System Support:System Generator and AccelDSPWindows XPSystem Generator only:Windows VistaRed Hat Linux 4u7Red Hat Linux 5u2SUSE Linux 10Required:ISE Design Suite 11.3 Logic EditionMATLAB R2008a R20

26、08b, or R2009a from the MathWorksOptional:ISE Design Suite 11.3 - Embedded/System EditionsSynopsys Synplify Pro 8.9Mentor Graphics ModelSim 6.4bSystem Generator for DSP and AccelDSP 11.2Operating System Support:Windows XP (32 bit only) - Both System Generator and AccelDSPRed Hat Linux 4u7 (32 and 64

27、 bit) - System Generator onlyRequired:ISE Design Suite 11.2 Logic EditionMATLAB R2008a R2008b, or R2009a from the MathWorksOptional:ISE Design Suite 11.2 - Embedded/System EditionsSynopsys Synplify Pro 8.9Mentor Graphics ModelSim 6.4bSystem Generator for DSP and AccelDSP 11.1Operating System Support

28、:Windows XP (32 bit only) - Both System Generator and AccelDSPRed Hat Linux 4u7 (32 and 64 bit) - System Generator onlyRequired:ISE Design Suite 11.1 Logic EditionMATLAB R2008a or R2008b from the MathWorksOptional:ISE Design Suite 11.1 - Embedded/System EditionsSynopsys Synplify Pro 8.9Mentor Graphi

29、cs ModelSim 6.4bSystem Generator for DSP and AccelDSP 10.1.03Required:Windows XP (32 bit only)ISE 10.1.03ISE 10.1 IP Update 3MATLAB R2007a, R2007b or R2008a from the MathWorksOptional:EDK 10.1.03ChipScope 10.1.03Synplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.3cSystem Generator for DSP an

30、d AccelDSP 10.1.02Required:Windows XP (32 bit only)ISE 10.1.02ISE 10.1 IP Update 2MATLAB R2007a, R2007b or R2008a from the MathWorksOptional:EDK 10.1.02ChipScope 10.1.02Synplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.3cSystem Generator for DSP and AccelDSP 10.1.01Required:Windows XP (32 b

31、it only)ISE 10.1.01ISE 10.1 IP Update 1MATLAB R2007a or R2007b from the MathWorksOptional:EDK 10.1.01ChipScope 10.1.01Synplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.3cSystem Generator for DSP and AccelDSP 10.1.00.1134Required:Windows XP (32 bit only)ISE 10.1ISE 10.1 IP Update 0MATLAB R20

32、07a or R2007b from MathWorksOptional:EDK 10.1ChipScope 10.1Synplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.3cSystem Generator for DSP 9.2.01.1028Required:Windows XPISE 9.2i Service Pack 3 or laterISE 9.2i IP Update 2 or laterMATLAB R2006b or R2007a from MathWorksOptional:AccelDSP 9.2iISE

33、9.2i Service Pack 3 Virtex-5 LX220T/SXT InstallerEDK 9.2iChipScope 9.2iSynplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.1fSystem Generator for DSP 9.2.00.967Required:Windows XPISE 9.2i Service Pack 2 or laterISE 9.2i IP Update 1 or laterMATLAB R2006b or R2007a from MathWorksOptional:ISE 9.

34、2i Service Pack 2 Virtex-5 LX220T/SXT InstallerChipScope 9.2iSynplicity Synplify Pro 8.8.0.4Model Technology ModelSim 6.1fSystem Generator for DSP 9.1.01Required:Windows XPISE 9.1i Service Pack 3 or laterISE 9.1i IP Update 2 or laterMATLAB R2006a or R2006b from MathWorks; see(Xilinx Answer 23145)for

35、 the required MATLAB 2006a patch.Optional:ISE 9.1i Service Pack 3 Virtex-5 LX220T/SXT InstallerChipScope 9.1iEDK 9.1iSynplicity Synplify Pro 8.6.2Model Technology ModelSim 6.1fSystem Generator for DSP 9.1Required:Windows XP (Windows XP 64 bit is not currently supported)ISE 9.1i Service Pack 2 or lat

36、erISE 9.1i IP Update 1 or laterMATLAB R2006a or R2006b from MathWorks; see(Xilinx Answer 23145)for the required MATLAB 2006a patch.Optional:ISE 9.1i Service Pack 2 Virtex-5 LX220T/SXT InstallerChipScope 9.1iEDK 9.1iSynplicity Synplify Pro 8.6.2Model Technology ModelSim 6.1fSystem Generator for DSP 8

37、.2.xPC Only ISE 8.2i Service Pack 3 or laterISE 8.2i IP Update 2ChipScope 8.2iEDK 8.2iR14 SP3 and R2006a from MathWorks; see(Xilinx Answer 23145)for the required MATLAB 2006a patch.Synplicity Synplify Pro 8.4Model Technology ModelSim 6.1bWindows XPSystem Generator for DSP 8.2PC Only ISE 8.2i Service

38、 Pack 1 or laterISE 8.2i IP Update 1ChipScope 8.2iEDK 8.2iR14 SP3 and R2006a from MathWorks; see(Xilinx Answer 23145)for the required MATLAB 2006a patch.Synplicity Synplify Pro 8.4Model Technology ModelSim 6.1bWindows XPSystem Generator for DSP 8.1.01PC Only ISE 8.1i Service Pack 2 or laterISE 8.1i

39、IP Update 1ChipScope 8.1iEDK 8.1iR14 SP1, R14 SP2, R14 SP3, and R2006a from MathWorks; see(Xilinx Answer 23145)for the required MATLAB 2006a patch.Synplicity Synplify Pro 8.4Model Technology ModelSim 6.1bWindows XPSystem Generator for DSP 8.1PC Only ISE 8.1i Service Pack 1 or laterPC Only ISE 7.1i S

40、ervice Pack 4 or laterChipScope 8.1iChipScope 7.1iEDK 7.1iR14 SP1, R14 SP2 and R14 SP3 from MathWorksWindows XPSystem Generator for DSP 7.1PC Only ISE 7.1i Service Pack 1 or laterChipScope 7.1iEDK 7.1i SP2R14, R14 SP1, R14 SP2 from MathWorksWindows XPSystem Generator for DSP 6.1PC Only ISE 6.3i Serv

41、ice Pack 1 or laterIP Update 4ChipScope 6.3iEDK 6.3iR13 SP1 or R14 from MathWorksFor information on installing System Generator for DSP 6.1.1 with ISE 6.2i, see(Xilinx Answer 18964)Windows XPSystem Generator for DSP 3.1PC Only ISE 5.2i Service Pack 1 or laterR13 from MathWorksSynplify 7.2Leonardo Sp

42、ectrum 2002eWindows 2000 and Windows XPSystem Generator for DSP 2.3PC Only ISE 5.1iIP Update 1R12 SP1 or R13 from MathWorksSynplify 7.2Leonardo Spectrum 2002dWindows NT 4.0 Service Pack 6, Windows 2000, and Windows XPSystem Generator for DSP 2.2PC Only ISE 4.2iIP Update 2R12 SP1 from MathWorksSynpli

43、fy 7.1Leonardo Spectrum 2002aWindows NT 4.0 Service Pack 6 or greater, Windows 2000, and Windows MESystem Generator for DSP 2.1PC Only ISE 4.1i Service Pack 1 or laterIP Update 1R12 or R12 SP1 from MathWorksWindows NT 4.0 Service Pack 6 or greater, Windows 2000, and Windows 98System Generator for DS

44、P 1.1PC Only ISE 3.xi Service Pack 7 or laterIP Update 3R11 SP1 or R12 from MathWorksWindows NT 4.0 and Windows 98System Generator for DSP 1.0PC Only ISE 3.1i Service Pack 1 or laterIP Update 1 (d_ip1)R11 SP1 from MathWorksWindows NT 4.0 and Windows 98也可以参考如果安装好了system generator(安装ISE套件的时候一般会一起安装的)和

45、相应的MATLAB后还需要做如下操作方能成功使用system generator1、打开我的程序 Xilinx Design Tools Xilinx Design Suit 14.2system generator MATLAB Configurator出现如下界面一开始出现的是no configured，Xilinx Suite选择IDS，并在前面方框勾上，并确保MATLABD的安装路径是正确的，注意MATLAB的安装路径不能出现中文和空格。最后点击Apply，稍等一会.Status就会出现Configured。说明system generator和MATLAB已经关联成功！来源：孤虚散人的博客