pc18层小高层施工组织设计.doc

《pc18层小高层施工组织设计.doc》由会员分享，可在线阅读，更多相关《pc18层小高层施工组织设计.doc（110页珍藏版）》请在三一办公上搜索。

1、target (management) decomposition responsibility (reference) Ann 2-5-1 to seriously implement implementation security first, and prevention of approach, according to building construction security checks standard and Chengdu city building construction site supervision management provides of requirem

2、ents, in combined this project manager production of reality, will and company signed set of safety integrated target management responsibility in the of target responsibility by about management personnel of security accountability for target decomposition, In order to maximize the control and redu

3、ction of all kinds of accidents in the construction of the project to ensure production safety. First, objectives: the project governed by the (Department) directly responsible for the production. Management team from project commencement to completion during by no casualties injured in accident, in

4、jury accident rate of no more than% (year), mechanical damage, fire accidents and may not happen. Second, implement safety measures, according to partial security technology to give the low-down the project team in a timely manner, and accumulation of security team members-organizational learning-re

5、lated operations. Third, on the part of the management of project risk site, mechanical, electrical and other effective protection should be taken, not in violation of education workers not to break the operation to stop illegal operations. Four, regular safety checks to clear risks, supervision and

6、 inspection of owning the job correct use of protective . Personal economy, and the exercise of a veto. This responsibility shall come into force from the date of signature. Project Manager (signature): Project Manager (signature): date of project management (management) security objectives appraisa

7、l form (reference) 2-5-2 project name: manager name: Title: class dates (months) items 1 2 3 4 5 6 7 8 9 10 11 12 to implement technical measures (10 points) as part of construction organization design of techniques and measures to implement the technology to give the low-down (20 points) are govern

8、ed by the team in time for technology to give the low-down the safe operation (20 points) whether organizations shift workers learn safety procedures Full protection (10 points) whether on by tube points part items engineering dangerous parts take has effective protection security checks (20 points)

9、 whether often for security checks, timely elimination hidden anti-three against (5 points) not illegal command, education workers not illegal operation stop illegal job protection supplies (5 points) supervision check belongs team personnel right using personal protection supplies civilization cons

10、truction (20 points) by jurisdiction team job site whether reached civilization construction Total project assessment overall assessment security assessment of the leading group inbehavior rules scientifically divided to six classes. A of the form of politics is the discipline, discipline, honesty a

11、nd discipline, discipline of the masses, work discipline and discipline of life. It can be said is to cover the party activities. Second is the discipline method separately, Ji, concentrated on the discipline. The revised regulations from the original irregularities of the ten variable into six cate

12、gories. Regulations of violation of the party constitution, to the detriment of the constitution authority and discipline behavior lacks necessary and serious responsibility accountability, and there is a discipline method. Now we adapt fully in accordance with the law of governing the country by la

13、w and in accordance with the regulations governing the party to take them apart, the legal attribution of law and discipline discipline. So the prominent characteristic is the discipline method separately, Ji The provisions of the Ordinance to discipline the table, make the law do not put inside the

14、 tube, to avoid our discipline or into party public security. Dont relate to the field, thus avoiding the repeated cross. Three is a reflection of strengthening the partys discipline construction of the latest achievements. New mainly reflect the partys eighteen years central resolutely implement th

15、e eight provisions, and resolutely against the four winds and so on, these new wrote the. For example, said the new in the implementation of the central eight of the spirit, a lot of opposition to the four winds wrote a clean Ji Law chapter, it represents the comprehensive strictly Party A the lates

16、t achievements. Party members if there is illegal and even criminal behavior, how to pursue disciplinary responsibility? According to Ji from the revision principle, where the state laws and regulations have stipulated content, will not re complex provisions. Revision of the Communist Party of China

17、 deleted 79 and criminal law, repeated terms of Public Security Management Punishment Law, and other laws and regulations. However, deletion law has provisions and not that the act is no longer the discipline, no longer be given disciplinary punishment. According to the party constitution, Party mem

18、bers have exemplary compliance with the obligations of the state laws and regulations, violations of the laws of the country are discipline Behavior. Remove the overlap with the discipline of the content and how to pursue party illegal and even criminal behavior of Party discipline and responsibilit

19、y. difference between five different conditions, with special provisions to stipulate, to achieve effective convergence of laws and discipline. It should be said, the revised in the Ji method to separate the stickRefers to the provisions of regulations set at the same time, through the special provi

20、sions, the disciplinary punishment and the law of the land treatmentManipulator is now used as a industrial robots in use, the control objectives often appear often in industrial automation. Industrial automation technology has gradually matured, as mature a technology line has been rapid developmen

21、t in industrial automation as a separate subject. Manipulator application began to filter into welding, logistics, mechanical processing, and other industries. Especially at high or very low temperatures, full of poisonous gases, high radiation case, robot in similar circumstances showed great use a

22、lso brings great convenience to the staff. Precisely because of this robot to get peoples attention began to be a high degree of development. Labor rates, working conditions, labor intensive aspects of promoting development. Both at home and abroad to develop the PLC (programmable logic controller)

23、is in various special circumstances and under special conditions set for mechanical devices. Now turned on the development of the microelectronics automatic control technology and the rapid development of the trains, the success of PLC hardware software and simulation control win big and successful

24、development, now continues to develop as a factory automation standards. Because robots are good development of the technology makes a good optimization of productive capital, and robot shows this unique advantages, such as: has good compatibility, wide availability, hardware is complete, and progra

25、mming that can be mastered in a short time, so in the context of industrial PLC applications became ubiquitous. Manipulator in many developed country agriculture and industry has been applied, such as the use of mechanical harvesting large areas of farmland, repeated operations on the high-speed lin

26、e that uses a robotic arm, and so on. Today, the high level of automation combined with restrictions on the manipulator development level is slightly lower than the international. The design is mainly arm welding machine by PLC Automation control. This of design let designers on in school by learn o

27、f has a must of consolidation, understand has some usually didnt opportunities awareness in world range within some leading level of knowledge has has must awareness, hope designers can in yihou of design in the can success of using in this design in the proceeds of experience 1.2 manipulator in bot

28、h at home and abroad of research profile automation mechanical arm research began Yu 20th century medium-term, after years with with computer and automation technology of development, Makes mechanical arm on the Grand stage of industrial automation and shine, gradually became an industrial evaluatio

29、n standards, and its importance can be seen. Now original robotic arm spent most of mass production and use on the production line, which is programmed robotic arm. As the first generation of manipulator position control systems main features, although not back several generations that can detect th

30、e external environment, but can still successfully complete like welding, painting, delivery as well as for materials simple movements. Second generation mechanical arms are equipped with sensors and manipulators have the environment there is a certain amount of sense, when the mechanical arm is to

31、use the program as a basis. Difference is that the robot begand岳阳华岭佳园住宅楼1#楼工程第一章 概 述1、1工程概况1、1、1建设开发概况（1）工程名称：岳阳市人和楼住宅楼。（2）工程地点：湖南省岳阳市（3）结构形式：十八层剪力墙结构。1、1、2建筑设计概况一概况岳阳市人和楼住宅楼工程为二类高层建筑、共十八层、负一层为地下车库、一至十八层为住宅。总建筑面积： 12317.12/栋，地下车库面积1127.67，耐火等级：地上部分为二级、地下为一级，抗震设防烈度为7度，设计使用年限为50年。工程基地呈一形，建筑物长34.6m、宽27

32、.85m。总建筑高度：54.900m。室内0.000相当于绝对标高40.000m。二墙体工程：高层为十八层剪力墙结构：本工程所有墙均采用砼多孔砖。（1）内墙装饰：水泥砂浆、喷涂墙面。所有室内墙体的门窗洞口及内墙阳角均应做50宽20厚1：2.5水泥砂浆暗护角。（2）外墙装饰：采用外墙面砖和外墙涂料。三楼地面（1）门厅、楼梯间、前室楼地面采用陶瓷地砖楼地面。（2）除（1）以外其余采用水泥砂浆楼地面。四天棚本工程天棚：门厅、楼梯间、前室为喷涂顶棚，客厅、餐厅、卧室为混合砂浆顶棚，卫生间、厨房为水泥砂浆顶棚。五防水屋面防水屋面等级为二级。作法：找平层采用20mm厚1：2.5水泥砂浆,基面转角做面圆弧形

33、、找平层上设防水层，防水层主要采用SBS厚改性沥青防水卷材、保温隔热层使用水泥聚苯板、刚性防水层采有40MM厚C20细石砼内配4间距200双向钢筋网，同时兼做防水保护层。斜屋面贴蓝灰色波形装饰瓦。六门窗本工程所有入户门，均采用成品高级加厚防盗门；所有窗框均采用铝合金窗。1、1、3结构设计概况本工程为现浇钢筋砼剪力墙结构，建筑结构安全等级为二级，主体结构使用年限为50年；框架柱、短肢剪力墙抗震等级为二级，剪力墙等级为三级。砼强度等级：基础垫层：C15，构造柱、过梁：C20，基础梁、底板、承台砼强度等级为C35。地下室墙及底板砼抗渗等级：S6。梁、板的强度等级为C30，剪力墙、柱（标高-0.050

34、）以下砼强度等级为C40；13层（标高-0.0508.950）为C35，三层以上（标高8.950以上）：C30。1、1、4 安装工程设计概况 电气工程概况岳阳市人和楼工程总设备容量均为666KW,总计算负荷为332KW.其中住宅照明设备容量为576KW,计算负荷为260KW；公共设备设备容量为90 KW,计算负荷为72 KW。供配电系统1、变配电室内设低压配电室和柴油发电机房，低压配电室内设两台干式变压器和16台抽屉式低压开关柜，低压母线采用单母线分段接线，并以放射式和树干式相结合的方式向本小区和岳阳市公安局白石岭分局办公楼及其附属用房供电。2、公用设备（电梯、水泵、风机和公用照明）每栋设总计

35、量，住宅照明每户单独计量。3、消防设备（消火栓泵、喷淋泵、消防电梯、排烟风机、送风机和应急照明）双电源供电，末端自动切换。线路敷设1、所有线路采用铜芯导线、电缆。消防负荷干线采用NHW1KV，其它负荷干线采用ZRW1KV。2、从小区变配电室至各楼栋进线箱的电缆桥架敷设，出电缆桥架穿管埋地暗敷；各楼栋进线箱至各照明箱、动力箱和电表箱的电缆沿楼梯间或竖井内桥架敷设，出桥架穿管暗敷。3、照明支线采用BV500导线，除注明外，导线均为2.5mm2.照明线路均穿PVC管暗敷。2.5mm2导线穿管标准：导线 型号 规格ZRBV500 2.5mm2(BV500 2.5mm2导线根数2568镀锌钢管SC15S

36、C20紧定式镀锌电线管JCG20JDG25镀锌电线管TC20TC25难燃PVC电线管PC20PC25备注超8根加管安全保护1、全系统采用TNS系统。采用三相五线制或单相三线制，干线选五芯或三芯电缆。2、变配电室、发电机房的接地包括变压器中性点接地、建筑物防雷接地等各种接地均共一个接地网。接地电阻要求不大于1欧，否则应增设人工接地装置。3、凡电气设备正常时不带电的金属外壳，穿线金属管、金属接线盒、桥架、支架等应做好电气连接并接地。4、插座的PE端子应与专用的PE导线相连接。建筑物防雷：本工程按三类防雷建筑设计防雷保护。与大楼其他接地系统共用接地网，接地电阻要求不大于1欧姆。接地保护：附设配电房的

37、单体低压接地保护形式为TN-S系统。防雷接地、保护接地、弱电系统接地共用一接地网，总接地电阻小于1欧。利用建筑物基础中钢筋做接地体：将基础四周外围地梁梁底两根主筋焊接成电气通路，与利用作引下线的柱内两根主筋及桩基内主筋焊接，地网均压带可利用基础地梁内钢筋作好焊接工作，无地梁处用扁钢254连接。电气设备的接地装置均应与接地网连接。给水系统：1、生活给水方式：一六层利用市政管网压力直接供水，七层及七层以上采用变频恒压供水方式，生活水池和生活给水泵设置在办公楼地下车室内。2、管材和接口：室内生活给水管（包括入户管）采用PPR给水管，热熔连接；其余室内给水管采用内筋嵌入式衬塑钢管，卡环式连接。3、管道

38、立管管卡安装：层高小于5m，每层设一个；层高大于5m，每层设二个。4、管道安装：5、管道距墙面距离：管 道 中 心 至 墙 面 距 离管径（mm）1520253240507080100125200250距离（mm）901001101101201201301401601702102406、给水横管应有0.0020.005的坡度坡向泄水装置.7、在可能经常检修的给水部件及支管丝扣阀门前或后，应安装可拆卸的配件，以便检修，设计图中不再标出具体位置。8、卫生器具安装高度和接管方式按国家标准99S304施工。 卫生间坐便器采用积为6L的冲洗水箱；所有蹲便器采用延时自闭式冲洗阀。9、PPR管公称直径与外径

39、的对应关系见下表：公称直径DN15DN20DN25DN32DN40DN50DN80外径De20De25De32De40De50De63De9010、管材与接口：室外生活给水管采用球墨铸铁管，橡胶圈承插连接。11、管顶覆土深度：敷设行车道上，0.71.0m；敷设在非行车首上，0.51.0 m。12、管道基础：给水管应敷设在老土上，当管底较弱土质时，应换粘土分层夯实，其密实度不应小于95%；当管底为岩石层或半岩石层时，应敷设厚度为150mm的中粗砂垫层；当管底为软地基、流沙等特殊土质时，应通知设计院采取相应措施。排水系统：1、管材与接口：雨污水立管采用空壁内螺纹UPVC塑料管，室内排水横管采用UP

40、VC排水管粘接接口；压力废水管采用热镀锌钢管，丝扣连接。2、管道安装：3、排水立管中心与墙面的距离：管 道 中 心 至 墙 面 距 离立管管径（mm）5075100125150200300距离尺寸（mm）6080901001201302004、卫生器具排水管与排水横管垂直连接，应采用90o斜三通；5、排水产管与排出管的连接，采用两个45o弯头连接；排水管道的横管与立管连接，宜采用45o斜三（四）通和顺水（四）通。6、排水立管每层安装伸缩节，隔层安装检查口。7、排水立管穿楼板处在楼板底安装阻米圈。8、排水立管底部设混凝土支墩固定。9、生活排水管道貌岸然的坡度：（除设计图中标注外）铸铁管管径（mm

41、）5075100125150200标准坡度%035252015108塑料管管径（mm）5075110125160200标准坡度%02515121075 注：塑料排水支管标准坡度均为0.02610、排水体制采用雨污分流、清污分流的原则。11、管材与接口：室外排水管采用承插钢筋混凝土排水管，水泥砂浆接口。12、管道基础：视现场土质情况、埋设深度、管材类型等因素参照国标95S516施工，如遇软地基、流砂等特殊土质时，应通知设计院采取相应措施。13、管道两侧回填土的压实度：对塑料管、混凝土、钢筋混凝土管和铸铁管，其压实度不应小于90%；对于钢管道，其压实度不应小于95%。（此条适用于给水管）14、井类

42、：、检查井的内径和构造要求：可视管径、埋深、地面荷载、地质情况等因素按国标02S515选用。、设在通车路面下或小区道路下的各种井室，必须使用重型井圈和井盖，井盖上表面与地面齐平，当设在花岩之类以美观要求很高的场坪时，井盖上部可采用活动的同类敷砌石材装饰；当设在绿化带上和不通车的场所可采用轻型井圈和井盖，井盖应高出地坪50mm，并在井口周围以2%的坡度向外做水泥砂浆护坡。、各种不同直径的管道在检查井内的连接，宜采用水面或管顶平接，并按国标02S515做流槽。15、单蓖雨水口和双蓖联合雨水口至雨水检查井的管道，其管径分别为d200和d300，起点埋深0.71.0，排水坡度大于或等于0.01。消防：

43、1、室外设置室外消火栓，详见总平面布置图。2、本建筑室内消防采用室内消火栓、自动喷水灭火系统和手提式干粉灭火器。在住宅各层各单元公共部位设消火栓箱1个，内设DN65消火栓2个（地下室为内设DN65消火栓1个）、25长65的麻质衬胶水带1条、19直流水枪1支、启泵按钮1个；室内消火栓给水水源为临时高压消防给水系统，消防游水池和消火栓泵设在办公楼地下车库内，临时高压消防给水系统与华岭小区1#屋顶19.2m消防水箱出水管连接，并在办公楼地下车库附近设置消防水泵接合器。室内消火栓用水量20L/S，室外消火栓用水量为15L/S。在地下车库内设置自动喷水灭火系统，喷淋泵集中设于办公楼地下车库，并与华岭小区

44、1#楼屋顶19.2m3消防水箱出水管连接。火灾危险等级为中危险级级，喷水强度为8L/min.2m.,作用面积160m，喷头工作压力0.10Mpa。消火栓给水泵控制：a消火栓箱内的启动按钮；b，消防中心启动；c.水泵房就地启动。自动喷淋给水控制：a.消火栓箱内的启动按钮；b.消防中心启动；c.水泵房就地启动。3、管材和接口：室内消火栓给水管和自动喷淋给水管采用内外镀锌钢管，DN100采用丝扣连接，DN100采用法兰或卡箍连接，镀锌钢管与法兰的连接处应二次镀锌。4、室内消火栓栓口离地面高度为1.10m,安装参照99S202.管材：生活给水管采用PPR管，热容连接；屋面给水管及埋地管采用涂塑钢管法兰连接。消火栓系统：DN100镀锌钢管，DN100采用焊接钢管，喷淋采用内外热镀锌钢管。污水管采用UPVC排水管，排水出户管采用埋地UPVC排水管。第二章施工部署2、1项目经理部管理机制2、1、1项目经理部的组织机构技术负责人木部施工员钢筋施工员泥部施工员给排水施工员施工生产组技术安质组专职质检员安全员技术内业员测量员试验员土建预算员水电预算员材料员仓管员机管员经营管理组材料供应组机电管理组电气施工员项目经理