国标中英文对照附图纸.doc

上传人：sccc

文档编号：4591414

上传时间：2023-04-29

格式：DOC

页数：15

大小：201KB

《国标中英文对照附图纸.doc》由会员分享，可在线阅读，更多相关《国标中英文对照附图纸.doc（15页珍藏版）》请在三一办公上搜索。

1、一、螺栓方头螺栓 C级UDC 621.882.6 | GB 8-88 | 代替 GB8-76Square head bolts-Product grade C沉头方颈螺栓UDC 621.882.6 | GB 10-88 | 代替 GB10-76Flat countersunk square neck bolts沉头带榫螺拴UDC 621.882.6 | GB 11-88 | 代替 GB11-76Flat countersunk nib bolts半圆头方颈螺栓UDC 621.882.6 | GB 12-88 | 代替 GB12-76Cup head square neck bolts半圆头带榫

2、螺栓UDC 621.882.6 | GB 13-88 | 代替 GB13-76Cup head nid bolts大半圆头方颈螺栓 C级ISO 8677:1986 | GB 14-1998 | 代替 GB14-88Cup head square neck bolts with large head-Product grade C大半圆头带榫螺栓UDC 621.882.6 | GB 15-88 | 代替 GB15-76Cup head nib bolts with large head六角头铰制孔用螺栓UDC 621.882.6 | GB 27-88 | 代替 GB27-76Hexagon fi

3、t bolts-product grade A and B六角头螺杆带孔铰制孔用螺栓UDC 621.882.6 | GB 28-88 | 代替 GB28-76Hexagon fit bolts with split pin hole on shank-product grade A and B六角头头部带槽螺栓 A 和 B 级UDC 621.882.6 | GB 29.1-88 | 代替 GB29-76Hexagon bolts with slot on head -product A and B十字槽凹穴六角头螺栓UDC 621.882.6 | GB 29.2-88 | 代替 GB29-76

4、Cross recessed hexagon bolts with indentation六角头螺杆带孔螺栓UDC 621.882.6 | GB 31.1-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-product grade A and B六角头螺杆带孔螺栓细杆 B级UDC 621.882.6 | GB 31.2-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-Reduced shank-product grade B六角头螺杆

5、带孔螺栓细牙 A和B级UDC 621.882.6 | GB 31.3-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B六角头头部带孔螺栓 A 和 B级UDC 621.882.6 | GB 32.1-88 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-product grade A and B六角头头部带孔螺栓细杆 B级UDC 621.882.6 | GB 32.2-88

6、 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-Reduced shank-product grade B六角头头部带孔螺栓细牙 A 和 B 级UDC 621.882.6 | GB 32.3-88 | 代替 GB32、25、26-76Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B下方头螺栓 B级UDC 621.882.6 | GB 35-88 | 代替 GB35-76Square head bolts with smal

8、800-77Flat countersunk double nib bolts小半圆头低方颈螺栓 B级ISO 8678:1988 | GB /T 801-1998 | 代替 GB801-88Cup head square neck bolts with small head and short neck-product grade B六角头螺栓 C级ISO 4016:1999 | GB /T 5780-2000 | 代替 GB/T 5780-1986Hexagon head bolts-product grade C六角头螺栓全螺纹 C级ISO 4018:1999 | GB /T 5781-

9、2000 | 代替 GB/T 5781-1986Hexagon head bolts-Full thread-product grade C六角头螺栓ISO 4014：1999 | GB /T 5782-2000 | 代替 GB/T 5782-1986Hexagon head bolts六角头螺栓全螺纹ISO 4017：1999 | GB /T 5783-2000 | 代替 GB/T 5783-1986Hexagon head bolts-Full thread六角头螺栓-细杆-B级UDC 621.882.6 | GB 5784-86 | 代替 GB30、21-76Hexagon head

10、bolts-Reduced shank -Product grade B六角头螺栓细牙ISO 8765：1999 | GB /T 5785-2000 | 代替 GB/T 5785-1986Hexagon head bolts with fine pitch thread六角头螺栓细牙全螺纹ISO 8676：1999 | GB /T 5786-2000 | 代替 GB/T 5786-1986Hexagon head bolts with fine pitch thread-Full thread六角法兰面螺栓-加大系列-B级UDC 621.882.6 | GB 5789-86 | Hexa

11、gon flange bolts-Heavy series-product grade B六角法兰面螺栓-加大系列-细杆-B级UDC 621.882.6 | GB 5790-86 | Hexagon flange bolts-Heavy series-product grade B六角法兰面螺栓小系列ISO 4162：1990 | GB /T 16674-1996 | 代替 GB/T 5787、5788-1986Hexagon flange bolts-Small series钢网架螺栓球节点用高强度螺栓GB /T 16939-1997 | High strength bolts for j

12、oints of space grid structures二、螺柱双头螺柱 bm=1dUDC 621.882 | GB 897-88 | 代替 GB897-76Double end studs-bm=1d双头螺柱 bm=1.25dUDC 621.882 | GB 898-88 | 代替 GB898-76Double end studs-bm=1.25d双头螺柱 bm=1.5dUDC 621.882 | GB 899-88 | 代替 GB899-76Double end studs-bm=1.5d双头螺柱 bm=2dUDC 621.882 | GB 900-88 | 代替 GB900-76Do

13、uble end studs-bm=2d等长双头螺柱 B级UDC 621.882 | GB 901-88 | 代替 GB901-76Double end studs(clamping type) -Product grade B手工焊用焊接螺柱GB 902.1-89 | 代替 GB902-76Weld studs for manual welding机动弧焊用焊接螺柱GB 902.2-89 | 代替 GB902-76Weld studs for arc welding储能焊用焊接螺柱GB 902.3-89 | 代替 GB902-76Weld studs for capacitor discha

15、621.882.3 | GB 56-88 | 代替 GB56-76Hexagon thick nuts蝶形螺母UDC 621.882.3 | GB 62-88 | 代替 GB62-76Wing nuts环形螺母UDC 621.882.3 | GB 63-88 | 代替 GB63-76Lifting nuts组合式盖形螺母UDC 621.882.3 | GB 802-88 | 代替 GB802-76Acorn nuts球面六角螺母UDC 621.882.3 | GB 804-88 | 代替 GB804-76Hexagon nuts with raised face扣紧螺母UDC 621.882.

16、3 | GB 805-88 | 代替 GB805-76Tight nuts滚花高螺母UDC 621.882.3 | GB 806-88 | 代替 GB806-76Knurled nut with collar滚花薄螺母UDC 621.882.3 | GB 807-88 | 代替 GB807-76Knurled nuts小六角特扁细牙螺母UDC 621.882.3 | GB 808-88 | 代替 GB808-76Small hexagon thin nuts-Fine pitch thread嵌装圆螺母UDC 621.882.3 | GB 809-88 | 代替 GB809-76Lnsert

17、round nuts小圆螺母UDC 621.882.3 | GB 810-88 | 代替 GB810-76Small round nuts圆螺母UDC 621.882.3 | GB 812-88 | 代替 GB812-76Round nuts端面带孔圆螺母UDC 621.882.3 | GB 815-88 | 代替 GB815-76Round nuts with drilled holes in one face侧面带孔圆螺母UDC 621.882.3 | GB 816-88 | 代替 GB816-79Round nuts with set pin holes in side带槽圆螺母UDC

18、621.882.3 | GB 817-88 | 代替 GB817-76Slotted round nuts1型非金属嵌件六角锁紧螺母ISO 7040：1997 | GB /T 889.1-2000 | 代替 GB/T 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 11型非金属嵌件六角锁紧螺母细牙ISO 10512：1997 | GB /T 889.2-2000 | Prevailing torque type hexagon nuts(with non-metallic insert),

19、style 1,with fine pitch thread盖形螺母UDC 621.882.3 | GB 923-88 | 代替 GB923-76Acorn nuts1型六角螺母ISO 4032：1999 | GB /T 6170-2000 | 代替 GB/T 6170-1986Hexagon nuts,style 11型六角螺母细牙ISO 8673：1999 | GB /T 6171-2000 | 代替 GB/T 6171-1986Hexagon nuts,style 1,with fine pitch thread六角薄螺母ISO 4035：1999 | GB /T 6172.1-200

20、0 | 代替 GB/T 6172-1986Hexagon thin nuts(chamfered)非金属嵌件六角锁紧薄螺母ISO 10511：1997 | GB /T 6072.2-2000 | Prevailing torque type hexagon thin nuts(with non-metallic insert)六角薄螺母细牙ISO 8675：1999 | GB /T 6173-2000 | 代替 GB/T 6173-1986Hexagon thin nuts(chamfered) with fine pitch thread六角薄螺母无倒角ISO 4036：1999 | G

21、B /T 6174-2000 | 代替 GB/T 6174-1986Hexagon thin nuts(unchamfered)2型六角螺母ISO 4033：1999 | GB /T 6175-2000 | 代替 GB/T 6175-1986Hexagon nuts,style 22型六角螺母细牙ISO 8674：1999 | GB /T 6176-2000 | 代替 GB/T 6176-1986Hexagon nuts,style 2,with fine pitch thread六角法兰面螺母ISO 4161：1999 | GB /T 6177.1-2000 | 代替 GB/T 6177-

22、1986Hexagon nuts with flange六角法兰面螺母细牙ISO 10663：1999 | GB /T 6177.2-2000 | Hexagon nuts with flange-fine pitch thread1型六角开槽螺母-A和B级UDC 621.882.3 | GB 6178-86 | 代替 GB5758-76Hexagon slotted and castle nuts,style 1 -product grades A and B1型六角开槽螺母-C级UDC 621.882.3 | GB 6179-86 | 代替 GB5758-76Hexagon slotte

23、d nuts,style 1 -product grade C2型六角开槽螺母-A和B级UDC 621.882.3 | GB 6180-86 | Hexagon slotted and castle nuts,style 2 -Product grades A and B六角开槽薄螺母-A和B级UDC 621.882.3 | GB 6181-86 | 代替 GB5960-76Hexagon thin slotted nuts-Product grades A and B2型非金属嵌件六角锁紧螺母ISO 7041：1997 | GB /T 6182-2000 | 代替 GB/T 6182-198

24、6Prevailing torque type hexagon nuts(with non-metallic insert),style 2非金属嵌件六角法兰面锁紧螺母ISO 7043：1997 | GB /T 6183.1-2000 | 代替 GB/T 6183-1986Prevailing torque type hexagon nuts with flange(with non-metallic insert)非金属嵌件六角法兰面锁紧螺母细牙ISO 12125：1997 | GB /T 6183.2-2000 | Prevailing torque type hexagon nuts

25、with flange(with non-metallic insert)with fine pitch thread1型全金属六角锁紧螺母ISO 7719：1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986Prevailing torque type all-metal hexagon nuts,style 12型全金属六角锁紧螺母ISO 7042：1997 | GB /T 6185.1-2000 | 代替 GB/T 6185-1986Prevailing torque type all-metal hexagon nuts,style 22型全金属六角锁紧

26、螺母细牙ISO 10513：1997 | GB /T 6185.2-2000 | Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread2型全金属六角锁紧螺母 9级ISO 7720：1997 | GB /T 6186-2000 | 代替 GB/T 6186-1986Prevailing torque type all-metal hexagon nuts,style 2-Property class 9全金属六角法兰面锁紧螺母ISO 7044：1997 | GB /T 6187.1-2000 |

27、代替 GB/T 6187-1986Prevailing torque type all-metal hexagon nuts with flange全金属六角法兰面锁紧螺母细牙ISO 12126：1997 | GB /T 6187.2-2000 | Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread1型六角开槽螺母细牙 A和B级UDC 621.882.3 | GB 9457-88 | 代替 GB57、58-76Hexagon slotted and castle nuts,sty

28、le 1-fine pitch thread-product grades A and B2型六角开槽螺母细牙 A和B级UDC 621.882.3 | GB 9458-88 | Hexagon slotted and castle nuts,style 2-Fine pitch thread -Product grades A and B六角开槽薄螺母细牙 A和B级UDC 621.882.3 | GB 9459-88 | 代替 GB59、60-76Hexagon thin slotted nuts-Fine pitch thread -Product grades A and B焊接方螺母

31、槽沉头螺钉ISO 2009：1994 | GB /T 68-2000 | 代替 GB/T 68-1985Slotted countersunk flat head screws (common head style)开槽半沉头螺钉ISO 2010：1994 | GB /T 69-2000 | 代替 GB/T 69-1985Countersunk slotted raised head screws (common head style)内六角圆柱头螺钉ISO 4762：1997 | GB /T 70.1-2000 | 代替 GB/T 70-1985Hexagon socket head cap

32、 screws内六角平圆头螺钉ISO 7380：1997 | GB /T 70.2-2000 | Hexagon socket button head screws内六角沉头螺钉ISO 10642：1997 | GB /T 70.3-2000 | Hexagon socket countersunk head screws开槽锥端紧定螺钉UDC 621.882.219 | GB 71-85 | 代替 GB71-76Slotted set screws with cone point开槽锥端定位螺钉UDC 621.882.2 | GB 72-88 | 代替 GB72-76Slotted sets

33、crews with cone point开槽平端紧定螺钉UDC 621.882.219.4 | GB 73-85 | 代替 GB73-76Slotted set screws with flat point开槽凹端紧定螺钉UDC 621.882.219.4.092.6 | GB 74-85 | 代替 GB74-76Slotted set screws with cup point开槽长圆柱端紧定螺钉UDC 621.882.219.4.092.5 | GB 75-85 | 代替 GB75-76Slotted set screws with long dog point内六角平端紧定螺钉ISO

34、4026：1993 | GB /T 77-2000 | 代替 GB/T 77-1985Hexagon socket set screws with flat point内六角锥端紧定螺钉ISO 4027：1993 | GB /T 78-2000 | 代替 GB/T 78-1985Hexagon socket set screws with cone point内六角圆柱端紧定螺钉ISO 4028：1993 | GB /T 79-2000 | 代替 GB/T 79-1985Hexagon socket set screws with dog point内六角凹端紧定螺钉ISO 4029：1993

35、 | GB /T 80-2000 | 代替 GB/T 80-1985Hexagon socket set screws with cup point方头长圆柱球面端紧定螺钉UDC 621.882.2 | GB 83-88 | 代替 GB83-76Square set screws with long dog point and rounded end方头凹端紧定螺钉UDC 621.882.2 | GB 84-88 | 代替 GB84-76Square set screws with cup point方头长圆柱端紧定螺钉UDC 621.882.2 | GB 85-88 | 代替 GB85-76

36、Square set screws with long dog point方头短圆柱锥端紧定螺钉UDC 621.882.2 | GB 86-88 | 代替 GB86-76Square set screws with short dog point and cone end十字槽盘头螺钉ISO 7045：1994 | GB /T 818-2000 | 代替 GB/T 818-1985Pan head screws with cross recess十字槽沉头螺钉第1部分：钢4.8级ISO 7046-1：1994 | GB /T 819.1-2000 | 代替 GB/T 819-1985Coun

37、tersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3ISO 7046-2：1990 | GB /T 819.2-1997 | Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-fer

38、rous metals十字槽半沉头螺钉ISO 7047：1994 | GB /T 820-2000 | 代替 GB/T 820-1985Countersunk raised head screws (common head style) with cross recess方头平端紧定螺钉UDC 621.882.2 | GB 821-88 | 代替 GB821-76Square set screws with chamfered end十字槽圆柱头螺钉ISO 7048：1998 | GB /T 822-2000 | 代替 GB/T 822-1988Cheese head screws with

39、cross recess十字槽小盘头螺钉UDC 621.882.2 | GB 823-88 | 代替 GB823-76Cross recessed small pan head screws吊环螺钉UDC 621.882 | GB 825-88 | 代替 GB825-76Eyebolts开槽盘头定位螺钉UDC 621.882.2 | GB 828-88 | 代替 GB828-76Slotted pan head set setscrews with dog point开槽圆柱端定位螺钉UDC 621.882.2 | GB 829-88 | 代替 GB829-76Slotted setscrew

40、s with dog point开槽圆柱头轴位螺钉UDC 621.882.2 | GB 830-88 | 代替 GB830-76Slotted cheese head screws with shoulder开槽无头轴位螺钉UDC 621.882.2 | GB 831-88 | 代替 GB831-76Slotted shoulder screws开槽带孔球面圆柱头螺钉UDC 621.882.2 | GB 832-88 | 代替 GB832-76Slotted capstan screws开槽大圆柱头螺钉UDC 621.882.2 | GB 833-88 | 代替 GB833-76Slotted

41、 large cheese head screws滚花高头螺钉UDC 621.882.2 | GB 834-88 | 代替 GB834-76Knurled thumb screws滚花平头螺钉UDC 621.882.2 | GB 835-88 | 代替 GB835-76Knurled screws滚花小头螺钉UDC 621.882.2 | GB 836-88 | 代替 GB836-76Knurled screws with small head开槽盘头不脱出螺钉UDC 621.882.2 | GB 837-88 | 代替 GB837-76Slotted pan head screws with

42、 waisted shank六角头不脱出螺钉UDC 621.882.2 | GB 838-88 | 代替 GB838-76Hexagon screws with waisted shank滚花头不脱出螺钉UDC 621.882.2 | GB 839-88 | 代替 GB839-76Knurled thumb screws with waisted shank塑料滚花头螺钉UDC 621.882.2 | GB 840-88 | 代替 GB840-79Plastic diamond knurlhead screws开槽球面圆柱头轴位螺钉UDC 621.882.2 | GB 946-88 | 代替

43、GB946-76Slotted raised head with shoulder开槽球面大圆柱头螺钉UDC 621.882.2 | GB 947-88 | 代替 GB947-76Slotted large raised cheese head screws开槽沉头不脱出螺钉UDC 621.882.2 | GB 948-88 | 代替 GB948-76Slotted countersunk head screws with waisted shank开槽半沉头不脱出螺钉UDC 621.882.2 | GB 949-88 | 代替 GB949-76Slotted raised countersu

44、nk head screws with waisted shank内六角花形盘头螺钉UDC 621.882.2 | GB 2672-86 | 代替 GB2672-81Hexagon lobular socket pan head screws内六角花形沉头螺钉UDC 621.882.2 | GB 2673-86 | 代替 GB2673-81Hexagon lobular socket countersunk head screws内六角花形半沉头螺钉UDC 621.882.2 | GB 2674-86 | 代替 GB2674-81Hexagon lobular socket raised co

45、untersunk head screws内六角圆柱头轴肩螺钉UDC 621.882.215.6 | GB 5281-85 | Hexagon socket head shoulder screws内六角花形圆柱头螺钉-4.8级UDC 621.882.2 | GB 6190-86 | 代替 GB2671-81Hexagon lobular socket head cap screws-property class 4.8内六角花形圆柱头螺钉-8.8和10.9级UDC 621.882.2 | GB 6191-86 | 代替 GB2671-81Hexagon lobular socket head

46、 cap screws-property class 8.8 and 10.9精密机械用紧固件十字槽螺钉GB /T 13806.1-92 | Fasteners for mechanics-Cross recessed screws垫圈标准型弹簧垫圈UDC 621.882.4 | GB 93-87 | 代替 GB93-76Single coil spring lock washers Normal type平垫圈 C级ISO 7091：2000 | GB /T 95-2002 | 代替 GB/T 95-1985Plain washers-Product grade C大垫圈 A级ISO 7093-1：2000 | GB /T 96.1-2002 | 代替 GB/T 96-1985Plain washers-Large series-Product grade A大垫圈 C级ISO 7093-