07-07_油泥砂处理技术可行性方案(english).docx
《07-07_油泥砂处理技术可行性方案(english).docx》由会员分享,可在线阅读,更多相关《07-07_油泥砂处理技术可行性方案(english).docx(8页珍藏版)》请在三一办公上搜索。
1、Feasible plan of greasy filth grit treating project in Kuwait treating technology of greasy filth grit:The technology of Qingdao Kangtaizhongli Environment Protectional Technological Co.Ltd. absords the principle of physical classifying and gravity up and down. It can realize the classifying, separa
2、ting and cleaning function of big brain in the mud with oil. The ion treating equipment of mud with oil and its application experience. Our company has abundant experience and applying achievements in the pre-treating and treating in the end of the mud(mainly is the pressing, drying and biological m
3、odifying). The treating equipment can be used in all kinds of dangerous oil pollution coming from the oil industry producing such as well drilling, absorbing and manufacturing etc. Our treating principle and main process is as the following for the waste with oil: l 1st step:classifying and choosing
4、(heating, adding medicine and stiring);l 2nd step:eliminating the bigger impurity with the 8g vibration;l 3th step:eliminating 90% micro solids with 3000g two-phase centrifugal machine;l 4th step:absorbing the 6000g three phase centrifugal machine. The separated oil can reach the second use standard
5、; the separated water can be further treated; the separated solids can be fixed with the previous ones and prepared to be further treated;l 5th step:absorbing the 12000-g three-phase centrifugal machine. The separated water can satisfied the demand of WWTP or the treating demand of polluted sea wate
6、r.l 6th step:having the microorganism modified treatment, make the oil content separated from the solids satisfy the demand of the oil content in the local land.。Inputitng materialschoosingthree-phase centrifugalAnalizing machineoilwaterSolid remainHeat converterBiological treatmentmodulationClassif
7、ying and choosing According to the treating project of mud contenting with oil in Kuwait, our company offers the following preliminary treating plan:Pre-treating modelBiological modifyingMKIII equipmentCutting and cleaning the bagsliquidsolidaccumulation回收或市政处理Oil retrievingWater into WWTP or used i
8、npre-treatingsolidOrgnic solidStandardizing treatmentModulation and heating The pre-treating model includes digging pump, feed container, up and down tank cleaned itself, heat converter, conveyer and delivering liquid pump. The core MKIII equipment is mainly two-phase and three-phase centrifugal mac
9、hine, assisted by modulation and heating equipment. The general distribution is such as the following:柴油罐:diesel oil tank现场记录办公室和实验室:on-the-spot recording office and laboratory 加热炉撬: heating furnace pry工厂和工具储备间: factory and tools storage room进料罐: intake materials tank净化油罐:filtering oil tank含油水罐: wat
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 油泥 处理 技术 可行性 方案 english

链接地址:https://www.31ppt.com/p-1749265.html