摩托罗拉BSS系统维护OMC命令.ppt
摩托罗拉BSS系统维护,-日常维护操作简介,2,主要内容,一.通用人机命令介绍二.BSS状态检查命令三.BSS配置查看命令四.BSS(参数)操作命令五.OMC性能统计数据采集六.日常维护检查事项,3,一.通用人机命令,1.改变操作员的命令级别:chg_level 命令MMI-RAM 0115-chg_lEnter password for security level you wish to access:Current security level is 2直接回车即进入2级；若打错密码则继续在1级状态。,4,2.查看当前级别下可用的命令:helpMMI-RAM 0118-helpCommands available:!#add_cell add_neighbor add_rtf_path alias assess cage_audit cell_name chg_a5_alg_pr chg_act_alg_data chg_audit_sched chg_cell_element chg_cell_id chg_csfp chg_dte chg_eas_alarm chg_eas_report chg_element chg_hop_params chg_ksw_config chg_level chg_password chg_rtf_freq chg_severity chg_smscb_msg chg_stat_prop chg_throttle chg_time chg_ts_usage chg_x25config clear_cal_data clear_gclk_avgs clear_stats copy_cell copy_path del_act_alarm del_cell del_neighbor del_rtf_path del_smscb_msg device_audit disable_alarm disp_a5_alg_pr disp_act_alarm disp_alarm_sites disp_bss disp_cal_data disp_cbch_state disp_cell disp_cell_status disp_csfp disp_csfp_status disp_dte disp_element disp_enable_stat disp_equipment disp_flash disp_gclk_avgs disp_gclk_cal disp_gsm_cells disp_hdlc disp_hopping disp_interval disp_level disp_link_usage disp_mms_ts_usage disp_neighbor disp_options disp_processor disp_relay_contact disp_rtf_channel disp_rtf_path disp_severity disp_site disp_stat_prop.,5,3.查看某条具体命令的功能、格式和操作等级:manMMI-RAM 0118-man equip Command:equip Function:Equips the specified device or function.Additional information is prompted.Security Level:2Sysgen Mode:Can be executed in or out of sysgen mode.bsc or 0 Specifies the BSC.1 to 120 Specifies a BTS.Literal that uniquely identifies the device/function.Example 1:Equip a GPROC at the BSC equip 0 GPROC,6,二.BSS状态检查命令,BSC状态检查命令XCDR状态检查令BTS工作状态命令,7,BSC状态检查命令,1.查看C7信令链路MTL工作状态:MMI-RAM 0115-state 0 mtl*DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function-MTL 0 0 0 B-U NO REASON 30/06 18:55:31 NoneMTL 1 0 0 B-U NO REASON 30/06 18:55:34 NoneMTL 2 0 0 B-U NO REASON 30/06 18:55:48 NoneMTL 3 0 0 B-U NO REASON 30/06 18:55:51 NoneMTL 4 0 0 B-U NO REASON 30/06 18:55:40 NoneMTL 5 0 0 B-U NO REASON 30/06 18:55:43 NoneMTL 6 0 0 B-U NO REASON 30/06 18:55:52 NoneMTL 7 0 0 B-U NO REASON 30/06 18:55:54 NoneMTL 8 0 0 B-U NO REASON 30/06 18:55:45 NoneMTL 9 0 0 B-U NO REASON 30/06 18:55:53 NoneMTL 10 0 0 B-U NO REASON 30/06 18:55:53 None END OF STATUS REPORT,8,2.检查所有2M接口的状态:MMI-RAM 0115-state 0 mms*DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function-MMS 0 0 0 B-U NO REASON 28/06 20:40:54 NoneMMS 0 1 0 B-U NO REASON 28/06 20:40:55 NoneMMS 1 0 0 B-U MMS Providing Clock 28/06 20:43:28 NoneMMS 1 1 0 B-U NO REASON 06/07 13:45:08 NoneMMS 2 0 0 B-U NO REASON 28/06 20:40:53 NoneMMS 2 1 0 B-U NO REASON 28/06 20:40:53 NoneMMS 3 0 0 B-U NO REASON 28/06 20:40:52 NoneMMS 3 1 0 B-U NO REASON 02/07 15:23:01 NoneMMS 4 0 0 B-U NO REASON 28/06 20:40:52 NoneMMS 4 1 0 B-U NO REASON 28/06 20:40:52 NoneMMS 5 0 0 B-U NO REASON 28/06 20:40:51 NoneMMS 5 1 0 B-U NO REASON 28/06 20:40:51 NoneMMS 6 0 0 B-U NO REASON 28/06 20:40:50 NoneMMS 6 1 0 B-U NO REASON 28/06 20:40:51 None.END OF STATUS REPORT,9,3.检查所有基站的工作状态:MMI-RAM 0115-state 0 site*DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function-SITE 0 0 0 B-U NO REASON 28/06 20:43:28 NoneSITE 1 0 0 B-U NO REASON 07/07 10:28:13 NoneSITE 3 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 6 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 7 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 8 0 0 B-U NO REASON 07/07 10:28:14 NoneSITE 13 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 16 0 0 B-U NO REASON 07/07 10:28:15 NoneSITE 54 0 0 B-U NO REASON 07/07 10:46:17 NoneSITE 55 0 0 B-U NO REASON 07/07 10:28:18 NoneSITE 56 0 0 B-U NO REASON 07/07 10:28:18 NoneSITE 58 0 0 B-U NO REASON 07/07 10:41:44 NoneSITE 62 0 0 B-U NO REASON 07/07 10:28:17 NoneSITE 63 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 75 0 0 B-U NO REASON 07/07 10:28:16 NoneSITE 98 0 0 B-U NO REASON 07/07 10:28:18 None END OF STATUS REPORT,10,4.使用该命令可以查看该BSC的所有LAC和CELL_ID:MMI-RAM 0115-disp_bssOPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped NE:Not Equipped S:Shutdown SITE FU STATUS#OF GSM CELL ID FREQ BCCHSITE STATE LOSS OF SECTORS MCC MNC LAC CI TYPE FREQ-0 B-U CLEAR 0 1 B-U CLEAR 3 Service 460 00 30502(7726h)13011(32D3h)DCS1800 546 Service 460 00 30502(7726h)13012(32D4h)DCS1800 553 Service 460 00 30502(7726h)13013(32D5h)DCS1800 560 3 B-U Redundancy 3 Capacity 460 00 30502(7726h)13031(32E7h)DCS1800 541 Service 460 00 30502(7726h)13032(32E8h)DCS1800 548 Service 460 00 30502(7726h)13033(32E9h)DCS1800 555 6 B-U CLEAR 3 Service 460 00 30502(7726h)13061(3305h)DCS1800 545 Service 460 00 30502(7726h)13062(3306h)DCS1800 552 Service 460 00 30502(7726h)13063(3307h)DCS1800 559 7 B-U CLEAR 3 Service 460 00 30502(7726h)13071(330Fh)DCS1800 544 Service 460 00 30502(7726h)13072(3310h)DCS1800 551 Service 460 00 30502(7726h)13073(3311h)DCS1800 558,11,5.使用该命令可以显示处理器的工作状态:MMI-RAM 0118-disp_process 0OPROCESSOR STATUS INFORMATION FOR LOCATION 0:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped NE:Not Equipped Related RelatedCPU#Processor Name State Reason Device Function-0113 GPROC 0 0(LCF 0)B-U NO REASON MTL 0 0 N/A MTL 1 0 N/A0114 GPROC 1 0(LCF 1)B-U NO REASON MTL 2 0 N/A MTL 3 0 N/A0115 BSP 0 0 B-U NO REASON OML 0 0 N/A OML 1 0 N/A XBL 0 0 N/A0116 GPROC 2 0(LCF 2)B-U NO REASON MTL 4 0 N/A MTL 5 0 N/A0117 GPROC 3 0(LCF 3)B-U NO REASON MTL 6 0 N/A MTL 7 0 N/A0118 GPROC 4 0(LCF 4)B-U NO REASON MTL 8 0 N/A MTL 9 0 N/A0119 BSP 1 0 E-U NO REASON N/A N/A0213 GPROC 5 0(LCF 5)B-U NO REASON MTL 10 0 N/A0214 GPROC 6 0(LCF 6)B-U NO REASON N/A N/A0215 GPROC 7 0(LCF 7)B-U NO REASON SITE 54 0 N/A SITE 56 0 N/A SITE 55 0 N/A SITE 98 0 N/A.END OF STATUS REPORT,12,6.查看当前存在的告警:MMI-RAM 011a-disp_act_alarm 0 There are no active alarms at site 0.命令参数:站号 0:BSC 或 XCDR 1100:BTS 也可输入需要查询的站号,如查询“柳州局”（1号站），则需MMI-RAM 011a-disp_act_alarm 1即可查询到该站当前存在的告警。7.查看时钟板状态:MMI-RAM 011a-state 0 gclk*GCLK 0 0 0 B-U GCLK Phase Locked 12/06 10:21:47 NoneGCLK 1 0 0 E-U GCLK Phase Locked 12/06 10:21:47 None,13,8.查看CIC电路状态:MMI-RAM 0117-state 0 cic 128 to 144DEVICE STATUS INFORMATION FOR LOCATION 0:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped S:ShutdownNE RESPONSE-CIC 128 D-NE No reason-0 时隙,没有定义,CIC 129 D-NE No reason CIC 130 D-NE No reasonCIC 131 D-NE No reasonCIC 132 D-NE No reasonCIC 133 E-U No reasonCIC 134 E-U No reasonCIC 135 E-U No reasonCIC 136 E-U No reasonCIC 137 E-U No reasonCIC 138 E-U No reasonCIC 139 E-U No reasonCIC 140 E-U No reasonCIC 141 E-U No reasonCIC 142 E-U No reasonCIC 143 E-U No reasonCIC 144 D-NE No reason-对应XCDR的16 时隙,没有定义END OF STATUS REPORT,14,XCDR状态检查命令,1.检查2M口的状态:(同BSC);2.检查当前存在的告警:(同BSC);3.查看与BSC间的2M联接关系:MMI-RAM 011a-disp_bss_con The RXCDR to BSS connectivity is as follows:RXCDR MMS id 10 1 is connected to BSS 1-MMS id 1 0 RXCDR MMS id 8 0 is connected to BSS 1-MMS id 3 0 RXCDR MMS id 8 1 is connected to BSS 1-MMS id 5 0 RXCDR MMS id 6 0 is connected to BSS 1-MMS id 7 0 RXCDR MMS id 30 0 is connected to BSS 1-MMS id 9 0 RXCDR MMS id 30 1 is connected to BSS 1-MMS id 11 0 RXCDR MMS id 28 0 is connected to BSS 1-MMS id 21 0 RXCDR MMS id 28 1 is connected to BSS 1-MMS id 23 0 Finished displaying RXCDR to BSS connectivity,15,4.显示XCDR内定义的半固定连接:MMI-RAM 011a-disp_link The CEPT nailed connections are as follows:-Incoming MMS Id:10 1 Timeslot:16 Outgoing MMS Id:24 0 Timeslot:16Incoming MMS Id:8 0 Timeslot:16 Outgoing MMS Id:20 0 Timeslot:16Incoming MMS Id:8 1 Timeslot:16 Outgoing MMS Id:16 0 Timeslot:16Incoming MMS Id:6 0 Timeslot:16 Outgoing MMS Id:12 0 Timeslot:16Incoming MMS Id:30 0 Timeslot:16 Outgoing MMS Id:44 0 Timeslot:16Incoming MMS Id:30 1 Timeslot:16 Outgoing MMS Id:40 0 Timeslot:16Incoming MMS Id:30 1 Timeslot:1 Outgoing MMS Id:38 0 Timeslot:16Incoming MMS Id:28 0 Timeslot:16 Outgoing MMS Id:36 0 Timeslot:16Incoming MMS Id:28 0 Timeslot:1 Outgoing MMS Id:34 0 Timeslot:16Incoming MMS Id:28 1 Timeslot:16 Outgoing MMS Id:32 0 Timeslot:16Incoming MMS Id:28 1 Timeslot:1 Outgoing MMS Id:29 0 Timeslot:16Incoming MMS Id:10 0 Timeslot:2 Outgoing MMS Id:10 1 Timeslot:1Incoming MMS Id:10 0 Timeslot:3 Outgoing MMS Id:26 0 Timeslot:1Incoming MMS Id:10 0 Timeslot:4 Outgoing MMS Id:26 0 Timeslot:2Incoming MMS Id:10 0 Timeslot:5 Outgoing MMS Id:26 0 Timeslot:3Incoming MMS Id:26 1 Timeslot:2 Outgoing MMS Id:8 0 Timeslot:1 Finished displaying all nailed connections,16,BTS状态检查命令,1.检查当前基站的载频状态:MMI-RAM 0118-state 54 dri*DEVICE STATUS INFORMATION FOR LOCATION 54:OPER STATES:D:Disabled E:Enabled B:BusyADMIN STATES:L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function-DRI 0 0 0 B-U NO REASON 08/07 10:08:57 RTF 0 1 0DRI 0 1 0 B-U NO REASON 08/07 10:08:24 RTF 0 0 0DRI 0 2 0 B-U NO REASON 07/07 10:46:55 RTF 0 2 0DRI 0 3 0 B-U NO REASON 07/07 10:47:08 RTF 0 3 0DRI 1 0 0 B-U NO REASON 07/07 10:46:31 RTF 1 0 0DRI 1 1 0 B-U NO REASON 07/07 10:46:43 RTF 1 1 0DRI 1 2 0 B-U NO REASON 07/07 10:46:55 RTF 1 2 0DRI 1 3 0 B-U NO REASON 07/07 10:47:08 RTF 1 3 0DRI 2 0 0 B-U NO REASON 07/07 10:46:31 RTF 2 0 0DRI 2 1 0 B-U NO REASON 07/07 10:46:43 RTF 2 1 0DRI 2 2 0 B-U NO REASON 07/07 10:46:55 RTF 2 2 0DRI 2 3 0 B-U NO REASON 07/07 10:47:08 RTF 2 3 0 END OF STATUS REPORT,17,2.检查基站各小区用户占用情况:MMI-RAM 0118-disp_cell_s 54Start of report for LOCATION 54:GSM CELL IDMCC 460 460 460MNC 00 00 00LAC 30502(7726h)30502(7726h)30502(7726h)CI 13541(34E5h)13542(34E6h)13543(34E7h)-Frequency Type DCS1800 DCS1800 DCS1800BCCH Frequency 541 548 555-Status Barred Barred BarredReset in Prog No No NoSPI in Prog No No NoBSS BSSAP Prhb NA NA NAMSC BSSAP Prhb NA NA NASPI/MSC SCCP Prhb NA NA NAAccClass Bar NA NA NAFull Power Mode OFF OFF OFFExt Range Mode OFF OFF OFF FREE INUSE UNAVL FREE INUSE UNAVL FREE INUSE UNAVL-SDCCH 16 0 0 16 0 0 16 0 0 TCH/F 29 0 0 29 0 0 29 0 0 End of Report.,18,3.显示某载频的信道占用情况:MMI-RAM 0118-disp_rtf_ch 54 0 0Start of report for RTF 0 0 at location 54:TIMESLOT SUB-CHAN STATE-0 BCCH BCCH ACTIVE 1(SDCCH/8)0 IDLE 1 IDLE 2 IDLE 3 IDLE 4 IDLE 5 IDLE 6 IDLE 7 IDLE 2(TCH/F)0 IDLE 3(TCH/F)0 IDLE 4(TCH/F)0 IDLE 5(TCH/F)0 IDLE 6(TCH/F)0 IDLE 7(TCH/F)0 IDLE End of Report.,19,4.查看当前基站的站号:MMI-RAM 0115-disp_siteCurrent site number is 0*该命令可在BTS基站上执行,借以检查数据库是否下载正确.5.查看小区参数:MMI-RAM 0118-disp_cell 4 6 0 0 0 30502 13541(MCC MNC LAC Cell_id)frequency_type=DCS1800 4 bsic=36 max_tx_bts=21 max_tx_ms=30.cell_reselect_hysteresis=3 cell_reselect_param_ind=1 cell_bar_qualify=1 cell_reselect_offset=3 temporary_offset=0 penalty_time=1,20,三.配置查看命令,BSC/XCDR配置查看命令BTS 配置查看命令,21,BSC/XCDR配置查看命令,1.查看MMS 2M口的各时隙配置:MMI-RAM 0213-disp_mms_ts_us 0 0 1Start of Report:Site:0 MMS:0 1General Timeslot Usage:TS Usage Device ID Type Site CIC Group CIC State TS Group RTF Site RTF TS0 UNAVAILABLE1 RSL 0 0 0 64K 32 UNUSED.19 UNUSED20 RTF 2 1 0 FULL 321 RTF 2 1 0 FULL 322 RTF 1 1 0 FULL 3.29 RTF 1 0 0 FULL 330 RTF 0 0 0 FULL 331 RTF 0 0 0 FULL 3End of Report.,22,2.查看C7信令MTL的配置时隙:MMI-RAM 0213-disp_eq 0 mtl 0 0 Device identification for this MTL:0 First MMS identifier for this device:1 Second MMS identifier for this device:0 Timeslot on MMS where this device appears:163.查看某基站与BSC的A-bis接口路径:MMI-RAM 0213-disp_eq 0 path 54 0 Terminating SITE id is:54 The Unique PATH Identifier is:0 BSC MMS identifiers:8 0-BSC的E1接口编号 SITE identifier:54 Upstream MMS identifiers:0 0-BTS的NIU板第1个2M口,23,4.查看BSC的OPC和DPC*OPC(源信令点编码)DPC(目的信令点编码)OPC&DPC 必需与MSC侧对应.MMI-RAM 0213-disp_element opc 012620MMI-RAM 0213-disp_element opc 0 12619,24,BTS配置查看命令,1.查看基站的载频配置信息:MMI-RAM 0213-disp_eq 54 dri 0 2 DRI identifier:0 2 Cabinet identifier:0 Type of connection to the BTP:MASTER Port to which the carrier is connected:2 机柜内右起第3个 RTF identifier:GSM cell ID where the DRI appears:460 00 30502 13541-(所在小区号)Antenna select number for this cell:2-天线号(SURF板 1A&1B)COMB id:Cavity number for this COMB:The diversity flag for this DRI is:1 The fm cell type is:4,25,2.查看RTF频点配置:*RTF(Receive Transmit Function)MMI-RAM 0118-disp_eq 54 rtf 0 0 Type of carrier:BCCH-是否BCCH RTF identifier:0 0 Primary Unique PATH id is:0 GSM cell to which this carrier is assigned:460 00 30502 13541 Carrier absolute radio freq.channel:541-(频点)Carrier frequency hopping indicators:255 255 255 255 255 255 255 255 Carrier training sequence codes:4 4 4 4 4 4 4 4 SDCCH load:2 SDCCH placement priority:0 Channel allocation priority:0,26,3.查看某小区的所有相邻小区:MMI-RAM 0118-disp_neighbor 4 6 0 0 0 30502 13541 Start of neighbor report:GSM CELL ID BA BA FREQ BCCHMCC MNC LAC CI LOC SYNC SACCH BCCH TYPE FREQ BSIC-460 00 30502(7726h)13012(32D4h)INT NO YES YES DCS1800 553 32460 00 30502(7726h)13133(334Dh)INT NO YES YES DCS1800 558 33460 00 30502(7726h)13132(334Ch)INT NO YES YES DCS1800 551 33460 00 30502(7726h)13561(34F9h)INT NO YES YES DCS1800 545 34460 00 30498(7722h)13011(32D3h)EXT N/A YES YES PGSM 35 32460 00 30498(7722h)13563(34FBh)EXT N/A YES YES PGSM 29 38460 00 30498(7722h)13131(334Bh)EXT N/A YES YES PGSM 26 38460 00 30483(7713h)13123(3343h)EXT N/A YES YES PGSM 40 37460 00 30503(7727h)13121(3341h)EXT N/A YES YES DCS1800 542 32460 00 30502(7726h)13542(34E6h)INT NO YES YES DCS1800 548 36460 00 30498(7722h)13541(34E5h)EXT N/A YES YES PGSM 34 34460 00 30498(7722h)13542(34E6h)EXT N/A YES YES PGSM 25 34460 00 30498(7722h)13543(34E7h)EXT N/A YES YES PGSM 28 34460 00 30502(7726h)13543(34E7h)INT NO YES YES DCS1800 555 36 End of report,27,4.查看相邻小区的参数配置:MMI-RAM 0118-disp_neighbor 4 6 0 0 0 30502 13541 4 6 0 0 0 30502 13561(源小区)(目标小区)Start of neighbor report:Neighbor cell id:460 00 30502(7726h)13561(34F9h)Neighbor cell name:No Name DefinedNeighbor cell frequency type:DCS1800Placement:InternalSynchronization enabled:0(no)Frequency in the ba_sacch list:1(yes)Frequency in the ba_bcch list:1(yes)BCCH frequency number:545-目标小区BCCHBase station identity code:34-目标小区BSICMS transmit power maximum:30Neighbor receive level minimum:15Neighbor handover margin:8Power budget surrounding cell hreqave:4Receive quality handover margin:-63Receive level handover margin:-63Neighbor type 5 handover margin:63Adjacent channel interference test enabled:0(no)Power budget algorithm type:1Neighbor congestion handover margin:0 End of report,28,5.查看指定的小区的指定小区参数:1)查看 max_tx_bts 小区的功率发射偏移量 disp_ele max_tx_bts 54 cell_number=4 6 0 0 0 30502 135412)查看 max_tx_bts 小区的CRO:disp_ele cell_reselect_offset 54 cell_number=4 6 0 0 0 30502 135416.查看BTS的所有设备配置:MMI-RAM 0113-disp_eq 15 CSFP 0 0 0 BTP 0 0 0 BTP 1 0 0 DRI 0 0 0 DRI 0 1 0 DRI 0 2 0 DRI 1 0 0 DRI 1 1 0 DRI 1 2 0.,29,四.BSS操作命令,BSS操作命令设备安装命令设备删除命令,30,BSC操作命令,1.ins_device 命令功能:Brings a device into service by locking and then unlocking the device.格式:ins_device location Specifies the
