【BS英国标准】BS EN 1312112003 地面用GRP槽罐和容器.原材料.技术条件和验收条件.doc

Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN13121-1:2003GRP tanks and vessels for use above ground Part 1: Raw materials Specification conditions and acceptance conditionsThe European Standard EN 13121-1:2003 has the status of aBritish StandardICS 23.020.10 BS EN 13121-1:2003National forewordThis British Standard is the official English language version ofEN 13121-1:2003.The UK participation in its preparation was entrusted by Technical Committee PRI/5, UK Steering Committee for CEN/TC210, to Subcommittee PRI/5/1, Glass reinforced tanks and vessels, which has the responsibility to:aid enquirers to understand the text;present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on30 May 2003© BSI 30 May 2003ISBN 0 580 41954 1Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,pages 2 to 21 and a back cover.The BSI copyright date displayed in this document indicates when the document was last issued.Amd. No.DateCommentsAmendments issued since publicationEUROPEAN STANDARD NORME EUROPÉENNEEUROPÄISCHE NORMEN 13121-1May 2003ICS 23.020.10English versionGRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditionsRéservoirs et récipients en PRV pour applications hors sol - Partie 1: Matières premières - Conditions de spécifications et conditions d'utilisationOberirdische GFK-Tanks und -Behälter - Teil 1: Ausgangsmaterialien - Spezifikations- und AnnahmebedingungenThis European Standard was approved by CEN on 17 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I TÉ EUR O P ÉEN DE NOR M A L I S A TI ON EUR O P Ä I S C H ES KOM I TEE F Ü R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI© 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 13121-1:2003 EEN 13121-1:2003 (E)Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSIContentspageForeword . 4Introduction . 51Scope. 52Normative references . 53Terms, definitions, symbols and abbreviations. 73.1Terms and definitions . 73.2Symbols and abbreviations . 74Thermosetting resins. 84.1General . 84.2Unsaturated polyester resins. 104.3Vinylester resins. 104.4Vinylester urethane resins . 104.5Epoxy resins . 104.6Furane resins. 104.7Phenolic resins. 104.8Characterisation of thermosetting resins in the uncured state . 104.9Characterisation of thermosetting resins in the cured state. 115Curing agents for unsaturated polyester and vinylester resins . 115.1General . 115.2Initiators . 125.3Accelerators, organometallic . 125.4Promotors . 125.5Inhibitors . 126Reinforcing materials . 126.1General . 126.2Surface nonwovens . 126.3Chopped strand mats . 136.4Continuous strand mats . 136.5Woven fabrics/Woven roving fabrics . 136.6Rovings for winding and for chopping applications . 137Additives . 137.1General . 137.2Thixotropic agents . 137.3Conductive fillers . 147.4Fire retardants . 147.5Paraffin wax . 147.6Aggregates and fillers . 147.7Ultra-violet absorbers . 147.8Pigments . 147.9Surface active agents . 148Thermoplastic lining materials . 148.1General . 148.2Mechanical and thermal properties. 158.3Welding consumables . 178.4Dimensional stability . 179Material conformance documentation . 179.1General . 179.2Unsaturated polyester, vinylester and vinylester urethane resins . 179.3Epoxy resins and hardeners . 179.4Furane and phenolic resins . 187Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI9.5Curing agents and additives .189.6Surface nonwovens .189.7Chopped strand mats .189.8Woven fabrics/Woven roving fabrics .189.9Rovings for winding and for chopping applications .189.10Thermoplastic linings .19Annex ZA (informative) Relationship between this European Standard and the Essential Requirementsof EU Directive 97/23/EC.20Bibliography .21Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSIForewordThis document (EN 13121-1:2003) has been prepared by Technical Committee CEN/TC 210, "GRP tanks and ves- sels", the secretariat of which is held by DIN.This. European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latest by November 2003.This document has been prepared under a mandate given to CEN by the European Commission and the European