【BS英国标准】BS EN 617530832 Fibre optic interconnecting devices and passive components per.doc

BRITISH STANDARDBS EN61753-083-2:2008Fibre optic interconnecting devices and passive components performance standard Part 083-2: Non-connectorised single- mode fibre optic C-band/L-band WDM devices for category C Controlled environmentICS 33.180.20 BS EN 61753-083-2:2008National forewordThis British Standard is the UK implementation of EN 61753-083-2:2008. It is identical to IEC 61753-083-2:2007.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authorityStrategy Committee on 31 March 2008© BSI 2008ISBN 978 0 580 55516 9Amendments/corrigenda issued since publicationDateCommentsEUROPEAN STANDARDEN 61753-083-2NORME EUROPÉENNEEUROPÄISCHE NORM February 2008 ICS 33.180.20English versionFibre optic interconnecting devicesand passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment(IEC 61753-083-2:2007)Norme de qualité de fonctionnement des dispositifs d'interconnexionet composants passifs à fibres optiques - Partie 083-2: Dispositifs WDMbande C/bande L à fibres optiques unimodales, non connectorisés, pour catégorie C -Environnement contrôlé(CEI 61753-083-2:2007)Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten -Teil 083-2: Nicht mit Steckverbindern versehene Einmoden-Lichtwellenleiter- C-Band/L-Band-WDM-Bauteilefür die Kategorie C - Kontrollierte Umgebung (IEC 61753-083-2:2007)This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2008 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61753-083-2:2008 E 15 BS EN 61753-083-2:2008ForewordThe text of document 86B/2447/FDIS, future edition 1 of IEC 61753-083-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-083-2 on 2008-02-01.The following dates were fixed: latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2008-11-01 latest date by which the national standards conflicting with the EN have to be withdrawnAnnex ZA has been added by CENELEC.(dow)2011-02-01Endorsement noticeThe text of the International Standard IEC 61753-083-2:2007 was approved by CENELEC as a EuropeanStandard without any modification.CONTENTS1Scope . 42Normative references . 43Definitions . 64Abbreviated terms .65Test procedure .66Test report.67Performance requirements .67.1Dimensions .67.2Test details and requirements .6Annex A (normative) Sample size, sequencing and grouping requirements . 12Annex ZA (normative) Normative references to international publications with theircorresponding European publications . 14Bibliography. 13Table 1 Test details and requirements . 7Table A.1 Sequencing and number of samples for each test . 12FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 083-2: Non-connectorised single-mode fibre opticC-band/L-band WDM devices for category C Controlled environment1ScopeThis part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic C-band/L-band W DM device shall satisfy in order to be categorised as meeting the IEC standard, Category C controlled environment. The requirements cover devices with single-mode non-connectorised pigtails.C-band/L-band W DM devices combine and / or split C band and L band optical signals. Aguard band is required between the used wavelength in the C and L band.Commercially available C-band/L-band W DM devices have narrower wavelength ranges such as 1 530 nm to 1 564 nm for C-band and 1 574 nm to 1 625 nm for L-band, compared with ITU-T Supplement N.39 Definitions, 1 530 nm to 1 565 nm for C-band and 1 565 nm to 1625 nm for L-band. This standard describes performance standards for commercially availableC-band/L-band W DM devices.2Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.IEC 60793-2-50, Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibresIEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal)IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retentionIEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests ShockIEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage threshold characterisationIEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests ColdIEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat - High temperature enduranceIEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state)IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperatureIEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectorsIEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devicesIEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependence of attenuation in a single-mode fibre optic deviceIEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return lossIEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return lossIEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic branching devicesIEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-32: Examinations and measurements Polarisation mode dispersion measurement for passive optical componentsIEC/PAS 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay and chromatic dispersion1IEC 61753-021-2: Fibre optic interconnecting devices and passive component performance standard Part 021-2: Fibre optic connectors terminated on single mode fibre for category C Controlled environment1 To be published.3Definitions3.1guard banda wavelength range between two wavelength ranges C-band/L-band. WDM devices combine and/or split C-band and L-band wavelength ranges4Abbreviated termsJMEJones matrix eigenanalysisMPSmodulation phase shiftPMDpolarization mode dispersionPSAPoincaré sphere analysisW DMwavelength division multiplexing5Test procedureUnless otherwise specified, all test methods are in accordance with the appropriate IEC 61300 standard (see Table 1). Each test defines the number of samples to be evaluated. The samples used for each test are intended to be previously unstressed new samples but may also be selected from previously used samples if desired. The samples shall be terminated onto single-mode fibres as per IEC 60793-2-50. All measurements shall be carried out at normal room conditions, unless otherwise stated.The tests shall be performed in sequential order as shown in Table A.1.All tests are to be carried out to validate performance over the required operating wavelength range. All tests shall be carried out over the optical wavelength 1 530 nm to 1 564 nm and1 574 nm to 1 625 nm, unless otherwise stated.6Test reportFully documented test reports and supporting evidence shall be prepared and be available for inspection as evidence that the tests have been carried out and complied with.7Performance requirements7.1DimensionsDimensions shall comply with either an appropriate IEC interface standard or with those given in appropriate manufacturers drawings, where the IEC interface standard does not exist or cannot be used.7.2Test details and requirementsThe requirements are given only for pigtailed WDM devices. For connectorised components the connector performances shall be in compliance with IEC 61753-021-2.A minimum length of fibre or cable of 1,5 m per port shall be included in all climatic and environmental tests.The test details and requirements are given in Table 1.Table 1 Test details and requirementsNoTestsRequirementsDetails1AttenuationIEC 61300-3-7 0,8 dBAttenuation shall be met over the following operating wavelength range.Operating wavelength range in C-band:1 530 nm - 1 564 nm.Operating wavelength range in L-band:1 574 nm - 1 625 nm.This test shall be performed over1 530 nm 1 564 nm and1 574 nm 1 625 nm.Launch fibre length: 1,5 m. Source: depolarized.Spectral width of light source shallbe narrower than 1 nm. Tunable wavelength light source isrecommended.The test conditions shall provide attenuation measurement results with accuracy of < ±0,05 dB over the operating wavelength range.2Out of band attenuationIEC 61300-3-712 dB (pass band wavelengths)25 dB (Blocked wavelengths)Out of band attenuation shall be met over the operating wavelength range.Operating wavelength range in C-band:1 530 nm 1 564 nm.Operating wavelength range in L-band:1 574 nm 1 625 nm.Details: same as in test No. 13DirectivityIEC 61300-3-2035 dB Class T60 dB Class VDirectivity shall be met over the operating wavelength range.Operating wavelength range in C-band:1 530 nm 1 564 nm.Operating wavelength range in L-band:1 574 nm 1 625 nm.Details: same as in test No. 1All ports not under test shall be terminated to avoid unwantedreflections contributing to the measurement.Other conditions:The directivity