《种植手术培训》PPT课件.ppt
,Manual of Implant Surgery种植手术指南,1.Delayed Implantation 延期种植-IMPLANTIUM 3810(D-3.8,L-10mm)-IMPLANTIUM 4310(D-4.3,L-10mm)*2 stage(cover screw)覆盖螺丝*1 stage(healing abutment)愈合基台2.Immediate Implantation 即刻种植-SuperLine 6010(D-6.0,L-10mm)*1 stage(healing abutment)愈合基台,1.Delayed Implantation 延期种植-IMPLANTIUM 3810(D-3.8,L-10mm)-IMPLANTIUM 4310(D-4.3,L-10mm)*2 stage(cover screw)覆盖螺丝*1 stage(healing abutment)愈合基台,Crestal Incision 牙槽脊切口,Flap Reflection 翻瓣,After Flap Reflection 翻瓣后,Select Lindemann Guide Drill 选择Lindemann导向钻,3810 Fixture D.-3.8,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),Surgical stent,3810 Fixture D.-3.8,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),Surgical stent,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),Surgical stent,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),Select Parallel Pin 选择平行杆,Check the parallelism with adjacent tooth or implant 检查就位方向,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Check the parallelism with adjacent tooth or implant检查备孔的水平性,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Select Lindemann First Drill Lindemann先锋钻,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),Select Depth Gauge 测深尺,Check the depth 确认深度*Place the Depth gauge on the wall of osteotomy,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Select 3.4 Final Drill 选择3.4成型钻,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),Select 3.8 Final Drill 选择3.8成型钻,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),Select 3.8 Countersink 选择3.8皮质骨成型钻,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Countersink(1,000rpm with irrigation)3.8皮质骨成型钻*If bone density is high,recommended to drill up to top line of laser mark,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Countersink(1,000rpm with irrigation)3.8皮质骨成型钻*If bone density is high,recommended to drill up to top line of laser mark,3810 Fixture D.-3.8,L.-10mm,Turn left the cap to open左转打开瓶帽,Pull out the cap to open去除瓶帽,*Connect adapter to implant hex firmly连接种植体,*Pull out implant carefully取出种植体,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Fixture D.-3.8,L.-10mm Installation 植入3.8种植体*Top level of fixture be located 0.5mm below the crestal bone,Fixture D.-3.8,L.-10mm Installation 植入3.8种植体*Top level of fixture be located 0.5mm below the crestal bone,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Select Path Pin 选择定位杆,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Check the parallelism with Path pin确认种植体植入方向,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Check the parallelism with Path pin确认种植体植入方向,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),Check the depth 确认深度*Place the Depth gauge on the wall of osteotomy,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),Select 4.3 Final Drill 4.3成型钻,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4.3 Final Drill 4.3成型钻(1,000rpm with irrigation),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4.3 Final Drill 4.3成型钻(1,000rpm with irrigation),Select 4.3 Countersink 4.3皮质骨成型钻,4.3 Countersink(1,000rpm with irrigation)4.3皮质骨成型钻*If bone density is high,recommended drilling up to top line of laser mark,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4.3 Countersink(1,000rpm with irrigation)4.3皮质骨成型钻*If bone density is high,recommended drilling up to top line of laser mark,4310 Fixture D.-4.3,L.-10mm,Turn left the cap to open左转打开瓶帽,Pull out the cap to open去除瓶帽,*Connect adapter to implant hex firmly连接种植体,*Pull out implant carefully取出种植体,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Fixture D.-4.3,L.-10mm Installation 植入4.3种植体*During insertion,3045N.cm at 20rpm is recommended 扭力3045Ncm，转速20转/分,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Fixture D.-4.3,L.-10mm Installation 植入4.3种植体*During insertion,3045N.cm at 20rpm is recommended 扭力3045Ncm，转速20转/分,Select Ratchet adapter and Ratchet扭力控制器用接头和棘轮扳手,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Fixture D.-4.3,L.-10mm Installation with Ratchet 用棘轮扳手植入种植体(4.3)*Avoid applying 100N.cm torque or more,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Fixture D.-4.3,L.-10mm Installation with Ratchet 用棘轮扳手植入种植体(4.3)*Avoid applying 100N.cm torque or more,2 stage(cover screw)二段式手术(覆盖螺丝),Select Hex Driver 六角扳手,Cover screw installation with Hex Driver 用六角扳手固定覆盖螺丝,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Cover screw installation with Hex Driver 用六角扳手固定覆盖螺丝,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Cover screw installation with Hex Driver 用六角扳手固定覆盖螺丝,Suture 缝合,1 stage(healing abutment)一段式手术(愈合基台),Healing abutment(5.5M)installation with Hex Driver用六角扳手固定愈合基台(5.5M),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Healing abutment(5.5M)installation with Hex Driver用六角扳手固定愈合基台(5.5M),4310 Fixture D.-4.3,L.-10mm,3810 Fixture D.-3.8,L.-10mm,Healing abutment(5.5M)installation with Hex Driver用六角扳手固定愈合基台(5.5M),Suture 缝合,2.Immediate Implantation 即刻种植-SuperLine 6010(D-6.0,L-10mm)*1stage(healing abutment),Caries tooth extraction 拔除龋坏牙,6010 Fixture D.-6.0,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,Lindemann Guide Drill Lindemann导向钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,Lindemann First Drill Lindemann先锋钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,3.4 Final Drill 3.4成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,3.8 Final Drill 3.8成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,4.3 Final Drill 4.3成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,4.3 Final Drill 4.3成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,4.8 Final Drill 4.8成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,4.8 Final Drill 4.8成型钻(1,000rpm with irrigation),Select 6.0 Countersink 6.0皮质骨成型钻,6.0 Countersink 6.0皮质骨成型钻(1,000rpm with irrigation),6010 Fixture D.-6.0,L.-10mm,6010 Fixture D.-6.0,L.-10mm,6.0 Countersink 6.0皮质骨成型钻(1,000rpm with irrigation),Fixture D.-6.0,L.-10mm Installation 植入6.0种植体*Top level of fixture be located 0.5mm below the crestal bone,6010 Fixture D.-6.0,L.-10mm,6010 Fixture D.-6.0,L.-10mm,Fixture D.-6.0,L.-10mm Installation 植入6.0种植体*Top level of fixture be located 0.5mm below the crestal bone,Healing abutment(7.0M)installation with Hex Driver用六角扳手固定愈合基台(7.0M),6010 Fixture D.-6.0,L.-10mm,6010 Fixture D.-6.0,L.-10mm,Healing abutment(7.0M)installation with Hex Driver用六角扳手固定愈合基台(7.0M),Suture 缝合,Thank You!,
