中兴交换机配置.docx

中兴交换机配置中兴交换机基本配置命令 telnet配置1 配置vlan Zte(cfg)#set vlan 10 add port 1 undag Zte(cfg)#set port 1 pvid 10 Zte(cfg)#set vlan 10 enable 配置ip地址 Zte#conf router Zte(cfg-router)#set ipport 1 ipaddress 10.1.1.1 255.255.255.0 Zte(cfg-router)#set ipport 1 vlan 10 Zte(cfg-router)#set ipport 1 enable 设置用户名密码 Zte(cfg)#create user zte Zte(cfg)#set user zte login-pass zted telnet 配置2 设置telnet用户登录超时时间 Zte#line-vty timeout 15 设置telnet访问限制 Zte(cfg)set remote-access specific Zte(cfg)set remote-assessipaddress 10.1.1.2 255.255.255.0 三层配置模式 在全局配置模式线使用config router 命令进入三层模式 Zte(cfg)#config router Zte(cfg)# 端口配置 使能/关闭端口 Zte#set port <portlist> enable|disable 设置端口的自适应功能 Zte#set port <portlist> auto enable|disable 设置端口的工作方式和速率 Zte(cfg)#set port <portlist> duplex full|half Zte(cfg)#set port <portlist> speed 10|100|1000 端口限速 zte(cfe)#set port<portlist> bandwidth ingress off|onrate<64-1000000>rate zte(cfe)#set port<portlist> bandwidth egress off|onrate<64-1000000>rate 查看端口状态信息 Zte(cfg)#show port <portlist> Zte(cfg)#show port <portlist> statistics 查看mac表项 Zte(cfg)#shofdb detail Vlan配置命令 关闭 使能vlan Zte(cfg)#set vlan<vlanid>enable|disable 在vlan中加入制定端口 Zte(cfg)#set vlan<vlanist> add port <portlist>tag|untag 设置端口的pvid Zte(cfg)#set port <portlist>pvid<1-4094> 删除制定端口 Zte(cfg)set vlan<vlanist> delete <portlist> 在vlan中加入trunk Zte#set vlan<VLANLIST> add trunk tag|untag 删除vlan中的制定trunk Zte# set vlan<vlanlist> delete trunk <trunklist>