H3C交换机配置命令.docx

H3C交换机配置命令H3C交换机配置命令 1、 进入系统视图 <H3C>system-view H3C 2、 设备命名 H3Csysname waikelou_NW_SW4 3、 配置管理VLAN，配置管理IP地址 waikelou_NW_SW4 vlan 999 waikelou_NW_SW4management-vlan 999 waikelou_NW_SW4int Vlan-interface 999 waikelou_NW_SW4-Vlan-interface999ip address 192.168.99.7 255.255.255.0 4、 配置管理员账号和密码 waikelou_NW_SW4local-user fsyy waikelou_NW_SW4-luser-fsyypassword cipher fsyy 5、 配置管理员登录方式和权限 waikelou_NW_SW4-luser-fsyyservice-type telnet terminal level 3 6、 配置本地数据库认证 waikelou_NW_SW4user-interface aux 0 waikelou_NW_SW4-ui-aux0authentication-mode scheme waikelou_NW_SW4user-interface vty 0 4 waikelou_NW_SW4-ui-vty0-4authentication-mode scheme 7、 配置业务VLAN waikelou_NW_SW4 vlan 104 8、 给业务VLAN添加业务端口(1至10号) waikelou_NW_SW4-vlan104port Ethernet 1/0/1 to port Ethernet 1/0/10 9、 配置上行端口和上行Trunk链路 waikelou_NW_SW4interface GigabitEthernet 1/1/2 waikelou_NW_SW4-GigabitEthernet1/1/2port link-type trunk waikelou_NW_SW4-GigabitEthernet1/1/2port trunk permit vlan 1 10 100 104 999 waikelou_NW_SW4-GigabitEthernet1/1/2undo shutdown waikelou_NW_SW4-GigabitEthernet1/2/2port link-type trunk waikelou_NW_SW4-GigabitEthernet1/2/2port trunk permit vlan 1 10 100 104 999 waikelou_NW_SW4-GigabitEthernet1/2/2undo shutdown 10、配置快速生成树协议 waikelou_NW_SW4 stp mode rstp waikelou_NW_SW4 stp bpdu-protection waikelou_NW_SW4 stp enable 11、 配置默认路由 waikelou_NW_SW4ip route-static 0.0.0.0 0.0.0.0 192.168.99.1 preference 60 12、 常用命令 查看当前配置：display current-configuration 恢复出厂：reset startup-config 重新启动：reboot 返回上级：quit 保存配置：save 关闭端口：shutdown 开启端口：undo shutdown 网络测试：ping 路由跟踪：tracert