IEEE Standardsdraft standard template.doc

IEEE P2030/D3.0Draft Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation With the Electric Power System (EPS), and End-Use Applications and LoadsDCN 2030-10-0336-00-0003Revision HistoryRevDateSummary1.009-18-2009Initial document released skeletal outline1.101-14-2010Revisions to skeletal outline 2.004-16-2010Includes WG text submittals; WRTG additions; architectural model2.105-17-2010Includes WG comments addressed by WRTG; WRTG additions2.2a06-22-2010Redline version. All WG comments on 2.1 reviewed at WG meeting in SC; new revisions from WG meeting in SC; incorporated new text and revisions as a result of WG assignments from the meeting in SC.2.2b06-23-2010Redline accepted version. All WG comments on 2.0 reviewed at WG meeting in SC; new revisions from WG meeting in SC; incorporated new text and revisions as a result of WG assignments from the meeting in SC; editorial comments and IEEE formatting added. Note: Parking Lot Annex B has been removed from this version. Text from the parking lot annex is now in DCN # 2030-10-0277-00-00152.307-02-2010Redline version. All WG comments from SC meeting in May 2010; submissions received by 7/15/2010 from assignments made at SC meeting; WRTG edits from WRTG meeting in CO June 29-July 1, 2010 (excluding formatting changes); submissions received from assignment made at WRTG meeting. 3.007-29-2010All changes accepted. Draft released 8/2/2010 for WG comments. IEEE P2030/D3.0Draft Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation With the Electric Power System (EPS), and End-Use Applications and LoadsSCC21 Standards Coordinating Committee of theIEEE Fuel Cells, Photovoltaics, Dispersed Generation and Energy Storage SocietyApproved <XX MONTH 20XX>IEEE-SA Standards BoardCopyright © 2010 by the Institute of Electrical and Electronics Engineers, Inc.Three Park AvenueNew York, New York 10016-5997, USAAll rights reserved.This document is an unapproved draft of a proposed IEEE Standard. As such, this document is subject to change. USE AT YOUR OWN RISK! Because this is an unapproved draft, this document must not be utilized for any conformance/compliance purposes. Permission is hereby granted for IEEE Standards Committee participants to reproduce this document for purposes of international standardization consideration. Prior to adoption of this document, in whole or in part, by another standards development organization, permission must first be obtained from the IEEE Standards Activities Department (stds.iprieee.org). Other entities seeking permission to reproduce this document, in whole or in part, must also obtain permission from the IEEE Standards Activities Department. IEEE Standards Activities Department445 Hoes LanePiscataway, NJ 08854, USAAbstract: <Select this text and type or paste Abstractcontents of the Scope may be used>Keywords: <Select this text and type or paste keywords>IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation, or every ten years for stabilization. When a document is more than five years old and has not been reaffirmed, or more than ten years old and has not been stabilized, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon his or her independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as, a formal interpretation of the IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position, explanation, or interpretation of the IEEE.Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Recommendations to change the status of a stabilized standard should include a rationale as to why a revision or withdrawal is required. Comments and recommendations on standards, and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854USAAuthorization to photocopy portions of any individual standard for internal or personal use is granted by The Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.IntroductionThis introduction is not part of IEEE P2030 <draft_number>, Draft Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), and End-Use Applications and Loads.The sophistication of electrical power grids throughout the world vary significantly, and may vary within a country from area to area, or electrical service provider to electrical service provider.  The need to upgrade electrical power systems has stimulated the concept of Smart Grid, a broad and ill-defined term used globally to include application of additional information and communications technology to electrical power grids.  This need has also driven legislation and regulation of power systems throughout the world.The Energy Independence and Security Act (EISA) of 2007 calls for the development of protocols and standards to increase the flexibility of use for smart grid equipment and systems. Under Section 1305 of the act, this interoperable framework "shall be flexible, uniform, and technology neutral" and "align policy, business, and technology approaches in a manner that would enable all electric resources, including demand-side resources, to contribute to an efficient, reliable electricity network." The IEEE P2030 TM Draft Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), and End-Use Applications and Loads (IEEE P2030) supports this directive and addresses these issues as they relate to generation, transmission, distribution, transmission, storage, and end use of the electric power grid. Electricity knows no national boundaries. The same can be said for the Smart Grid (SG). Currently, there are many, both national and international, standardization initiatives related to the development of the SG concept. An SG roadmap was developed in 2010 by the International Electrotechnical Commission IEC, through its Strategic Group 3, developed a roadmap that is similar to that developed by the U.S. National Institute of Standards and Technology (NIST). There is considerable interest in this topic in developing countries that do not have a robust electric power infrastructure at this time. Building off of a conceptual reference model produced by NIST to facilitate SDOs in standards development for the Smart Grid, IEEE P2030 focuses on the interoperability components of communications, power systems, and information technology platforms (Figure 1). It views the Smart Grid as a large, complex “system of systems” and provides guidance through the numerous interoperable SG design pathways throughout the electric power system to the loads, and for serving end-use applications. This interoperability “groundwork” lays the foundation for the emerging Smart Grid applications layer that provides a platform for a number of advanced Smart Grid applications and services. Smart Grid Interoperability GuidanceFigure 1 Hierarchy of Smart Grid Interoperability Notice to usersLaws and regulationsUsers of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. CopyrightsThis document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document.Updating of IEEE documentsUsers of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association web site at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously.For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA web site at http:/standards.ieee.org.ErrataErrata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically.InterpretationsCurrent interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/index.html.PatentsIf the IEEE has not received letters of assurance prior to the time of publication, the following notice shall appear:Attention is called to the possibility that implementation of this<opt_trial-use><gde./rec. prac./std.> may require use of subject matter covered by patent rights. By publication of this<opt_trial-use><gde./rec. prac./std.>, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this<opt_trial-use><gde./rec. prac./std.> are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.The following notice shall appear when the IEEE receives assurance from a known patent holder or patent applicant prior to the time of publication that a licens