3gpp ts 51.0101 v8.0.0 (12).doc

3GPP TS 51.010-1 V8.0.0 (2008-12)Technical Specification3rd Generation Partnership Project;Technical Specification GroupGSM/EDGE Radio Access NetworkDigital cellular telecommunications system (Phase 2+);Mobile Station (MS) conformance specification;Part 1: Conformance specification(Release 8)The present document has been developed within the 3rd Generation Partnership Project (3GPP TM) and may be further elaborated for the purposes of 3GPP. The present document has not been subject to any approval process by the 3GPP Organizational Partners and shall not be implemented. This Specification is provided for future development work within 3GPP only. The Organizational Partners accept no liability for any use of this Specification.Specifications and reports for implementation of the 3GPP TM system should be obtained via the 3GPP Organizational Partners' Publications Offices.Release 8633GPP TS 51.010-1 V8.0.0 (2008-12)KeywordsGSM, mobile, MS, terminal, testing3GPPPostal address3GPP support office address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16Internethttp:/www.3gpp.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© 2008, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TTA, TTC).All rights reserved.ContentsForeword641Scope652References653Definitions, conventions and applicability743.1Mobile station definition and configurations743.2Applicability743.2.1Applicability of this specification743.2.1.1MS equipped with a connector743.2.1.2GPRS743.2.2Applicability of the individual tests753.2.3Applicability to terminal equipment753.3Definitions753.4Conventions for mathematical notations753.4.1Mathematical signs753.4.2Powers to the base 10753.5Conventions on electrical terms763.5.1Radio Frequency (RF) input signal level763.5.2Reference sensitivity level763.5.3Power level of fading signal763.6Terms on test conditions773.6.1Radio test conditions774Test Equipment784.1Terms used to describe test equipment in the present document784.2Functional requirements of test equipment785Testing methodology in general (layers 1, 2, and 3)785.1Testing of optional functions and procedures785.2Test interfaces and facilities795.3Different protocol layers795.4Information to be provided by the apparatus supplier795.5Definitions of transmit and receive times796Reference test methods806.1General806.2Choice of frequencies in the frequency hopping mode806.3"Ideal" radio conditions816.4Standard test signals816.5Power (control) levels817Implicit testing828Measurement uncertainty829Format of tests8210Generic call set up procedures8410.1Generic call set-up procedure for mobile terminating speech calls8410.1.1Initial conditions8410.1.2Definition of system information messages8410.1.3Procedure8710.1.4Specific message contents8810.2Generic call set-up procedure for mobile originating speech calls8910.2.1Initial conditions8910.2.2Definition of system information messages8910.2.3Procedure8910.2.4Specific message contents9010.3Generic call set-up procedure for mobile terminating data calls9110.3.1Initial conditions9110.3.2Definition of system information messages9210.3.3Procedure9210.3.4Specific message contents9210.4Generic call set-up procedure for mobile originating data calls9410.4.1Initial conditions9410.4.2Definition of system information messages9410.4.3Procedure9410.4.4Specific message contents9510.5Generic call set-up procedure for mobile terminating multislot configuration, minimum number of timeslots allocated9710.5.1Initial conditions9710.5.2Definition of system information messages9710.5.3Procedure9710.5.4Specific message contents9810.6Generic call set-up procedure for mobile originating multislot configuration, minimum number of timeslots allocated10010.6.1Initial conditions10010.6.2Definition of system information messages10010.6.3Procedure10110.6.4Specific message contents10110.7Generic procedure for GPRS downlink data transfer10310.7.1Initial conditions10310.7.2Definition of system information messages10310.7.3Procedure10310.7.4Specific message contents10410.8Generic procedure for GPRS uplink data transfer10410.8.1Initial conditions10410.8.2Definition of system information messages10410.8.3Procedure10410.8.4Specific message contents10510.9GPS Scenario and Assistance data for Assisted GPS signalling tests10610.9.1General10610.9.2GPS Scenario10710.9.3Assistance Data Reference Time10710.9.4Assistance Data Reference Location10710.9.5Assistance Data Navigation Model10810.9.6Assistance Data Ionospheric Model10910.9.7Assistance Data Almanac10910.9.8Assistance Data Acquisition Assistance11010.10GPS Scenarios and Assistance Data for Assisted GPS Minimum Performance tests11010.10.1General11010.10.1.1Satellite constellations and assistance data for performance testing11110.10.1.2GPS Scenarios for performance testing11110.10.1.2.1GPS Scenario #111110.10.1.2.2GPS Scenario #211110.10.1.2.3GPS Scenario #311210.10.1.2.4MS Location for TTFF test cases11210.10.1.2.4.1MS Location Offset11210.10.1.2.4.2MS Altitude11310.10.1.2.5Satellites to be simulated in each test case11310.10.2Information elements required for normal MS based testing11310.10.3Information elements required for MS based Sensitivity Fine Time Assistance test case11410.10.4Information elements available for normal MS assisted testing11410.10.5Information elements available for MS assisted Sensitivity Fine Time Assistance test case11510.10.6Contents of Information elements for Minimum performance testing11610.10.6.1General11610.10.6.2IE Random Offset Values11610.10.6.2.1GPS TOW11610.10.6.2.1GPS bit number (BN or Bit #)11610.10.6.3Assistance Data Reference Time11610.10.6.4Assistance Data Reference Location11810.10.6.5Assistance Data Navigation Model11810.10.6.6Assistance Data Ionospheric Model11910.10.6.7Assistance Data Almanac11910.10.6.8Assistance Data Acquisition Assistance12011General tests12311.1Verification of support and non-support of services (multiple numbering scheme or ISDN)12311.1.1Mobile Terminated (MT) calls12311.1.1.1Definition12311.1.1.2Conformance requirement12311.1.1.3Test purpose12311.1.1.4Method of test12311.1.1.4.1Initial conditions12311.1.1.4.2Procedure12311.1.1.5Test requirement12411.1.2Mobile Originated (MO) calls12411.1.2.1Definition12411.1.2.2Conformance requirement12411.1.2.3Test purpose12411.1.2.4Method of test12411.1.2.4.1Initial conditions12411.1.2.4.2Procedure12511.1.2.5Test requirement12511.2Verification of support of the single numbering scheme12511.2.1Definition12511.2.2Conformance requirement12511.2.3Test purpose12511.2.4Method of test12511.2.4.1Initial conditions12511.2.4.2Procedure12611.2.5Test requirement12611.3Verification of non-support of services (Advice of Charge Charging (AoCC)12611.3.1Definition12611.3.2Conformance requirement12611.3.3Test purpose12611.3.4Method of test12711.3.4.1Initial conditions12711.3.4.2Procedure12711.3.5Test requirement12711.4Verification of non-support of services (call hold)12711.4.1Definition12711.4.2Conformance requirement12711.4.3Test purpose12711.4.4Method of test12811.4.4.1Initial conditions12811.4.4.2Procedure12811.4.5Test requirement12811.5Verification of non-support of services (multiparty)12811.5.1Definition12811.5.2Conformance requirement12811.5.3Test purpose12811.5.4Method of test12811.5.4.1Initial conditions12811.5.4.2Procedure12811.5.5Test requirement12911.6Verification of non-support of feature (Fixed Dialling Number (FDN)12911.6.1Definition12911.6.2Conformance requirement12911.6.3Test purpose12911.6.4Method of test12911.6.4.1Initial conditions12911.6.4.2Procedure12911.6.5Test requirement13011.7IMEI Security13011.7.1Conformance requirements13011.7.2Test purpose13011.7.3Method of test13011.7.4Declaration13011.8Coding of the Bearer Capability information element13011.8.1Network to MS Direction13111.8.1.1BS 21 to 26 - Asynchronous Service13111.8.1.1.1BS 2113111.8.1.1.2BS 2213411.8.1.1.3BS 2413511.8.1.1.4BS 2513511.8.1.1.5BS 2613511.8.1.1.6BS 2313511.8.1.2BS 31 to 34 - Synchronous Service13611.8.1.2.1BS 3213611.8.1.2.2BS 3114011.8.1.2.3BS 3314011.8.1.2.4BS 3414111.8.1.3BS 61 - Alternate Speech / Data14111.8.1.3.1Speech/Asynchronous Data, Transparent14111.8.1.3.2Speech/Asynchronous Data, Non Transparent14311.8.1.3.3Speech/Synchronous Data14411.8.1.4BS 81 - Speech followed by Data14511.8.1.4.1Speech followed by Asynchronous Data14511.8.1.4.2Speech followed by Synchronous Data14511.8.1.5TS 61 - Alternate Speech / Facsimile group 314511.8.1.5.1TS 61 - Alternate Speech / Facsimile group 3, Transparent14611.8.1.5.2TS 61 - Alternate Speech / Facsimile group 3, Non-Transparent14711.8.1.6TS 62 - Automatic Facsimile group 314811.8.2MS to SS direction14811.8.2.1BS 21 to 26 - Asynchronous Service14811.8.2.1.1BS 2114911.8.2.1.2BS 2215211.8.2.1.3BS 2415311.8.2.1.4BS 2515311.8.2.1.5BS 2615311.8.2.1.6BS 2315311.8.2.2BS 31 to 34 - Synchronous Service15411.8.2.2.1BS 3215411.8.2.2.2BS 3115811.8.2.2.3BS 3315811.8.2.2.4BS 3415911.8.2.3BS 41 to 46 - PAD Access Asynchronous15911.8.2.3.12) BS 4115911.8.2.3.2BS 4216011.8.2.3.3BS 4416111.8.2.3.4BS 4516111.8.2.3.5BS 4616111.8.2.3.6BS 4316111.8.2.4BS 51 to 53 - Packet Service Synchronous16211.8.2.4.12) BS 5116211.8.2.4.2BS 5216211.8.2.4.3BS 5316211.8.2.5BS 61 - Alternate Speech / Data16211.8.2.5.1Speech/Asynchronous Data, Transparent16311.8.2.5.2Speech/Asynchronous Data, Non Transparent16511.8.2.5.3Speech/Synchronous Data16611.8.2.6BS 81 - Speech followed by Data16811.8.2.6.1Speech followed by Asynchronous Data16811.8.2.6.2Speech followed by Synchronous Data16811.8.2.7TS 61 - Alternate Speech / Facsimile group 316811.8.2.7.1TS 61 - Alternate Speech / Facsimile group 3, Transparent16911.8.2.7.2TS 61 - Alternate Speech / Facsimile group 3, Non Transparent17011.8.2.8TS 62 - Automatic Facsimile group 317011.8.2.9TS 11 and TS 12 - Speech17111.8.2.9.1Support of only full/half rate speech version 117111.8.2.9.2Support of speech full rate version 2 (Enhanced Full Rate)17111.8.2.9.3Support of full rate speech version 2 (EFR) and full and/or half rate speech version 3 (AMR)17212Transceiver17512.1Conducted spurious emissions17512.1.1MS allocated a channel17512.1.2MS in idle mode17812.2Radiated spurious emissions17912.2.1MS allocated a channel18012.2.2MS in idle mode18212.3Conducted spurious emissions for MS supporting the R-GSM frequency band18312.3.1MS allocated a channel18312.3.2MS in idle mode18512.4Radiated spurious emissions for MS supporting the R-GSM frequency band18712.4.1MS allocated a channel18712.4.2MS in idle mode18913Transmitter19113.1Frequency error and phase error19113.1.1Definition19113.1.2Conformance requirement19113.1.3Test purpose19113.1.4Method of test19213.1.5Test requirements19413.2Frequency error under multipath and interference conditions19413.2.1Definition19413.2.2Conformance requirement19413.2.3Test purpose19413.2.4Method of test19413.2.5Test requirements19613.3Transmitter output power and burst timing19613.3.1Definition19613.3.2Conformance requirement19613.3.3Test purpose19713.3.4Methods of test19813.3.5Test requirements20113.4Output RF spectrum20413.4.1Definition20413.4.2Conformance requirement20413.4.3Test purpose20513.4.4Method of test20613.4.5Test requirements20813.5Void21213.6Frequency error and phase error in HSCSD multislot configurations21213.6.1Definition21213.6.2Conformance requirement21213.6.3Test purpose21313.6.4Method of test21313.6.5Test requirements21513.7Transmitter output power and burst timing in HSCSD configurations21513.7.1Definition21513.7.2Conformance requirement21513.7.3Test purpose21713.7.4Methods of test21813.7.5Test requirements22113.8Output RF spectrum in HSCSD multislot configuration22713.8.1Definition22713.8.2Conformance requirement22713.8.3Test purpose22813.8.4Method of test22813.8.5Test requirements23013.9Output RF spectrum for MS supporting the R-GSM band23413.9.1Definition23413.9.2Conformance requirement23413.9.3Test purpose23513.9.4Method of test23513.9.5Test requirements23713.10(void)23913.11(void)23913.12(void)23913.13(void)23913.14(void)23913.15(void)23913.16GPRS transmitter tests23913.16.1Frequency error and phase error in GPRS multislot configuration23913.16.2Transmitter output power in GPRS multislot configuration24213.16.3Output RF spectrum in GPRS multislot configuration25413.17EGPRS transmitter tests26113.17.1Frequency error and Modulation accuracy in EGPRS Configuration26113.17.2Frequency error under multipath and interference conditions26513.17.3EGPRS Transmitter output power26813.17.4Output RF spectrum in EGPRS configuration27613.17.5Void28314Receiver28414.1Bad frame indication29014.1.1Bad frame indication - TCH/FS29014.1.2Bad frame indication - TCH/HS29214.1.3Void29414.1.4Void29414.1.5Bad frame indication - TCH/AFS (Speech frame)29414.1.6Bad frame indication - TCH/AHS29614.1.6.1Bad frame indication - TCH/AHS - Random RF input29614.1.7Void29714.2Reference sensitivity29714.2.1Reference sensitivity - TCH/FS29714.2.2Reference sensitivity - TCH/HS (Speech frames)29914.2.3Reference sensitivity - FACCH/F30114.2.4Reference sensitivity - FACCH/H30214.2.5Reference sensitivity - full rate data channels30314.2.6Reference sensitivity - half rate data channels30414.2.7Reference sensitivity - TCH/EFS30514.2.8Reference sensitivity - full rate data channels in multislot configuration30714.2.9Reference sensitivity - TCH/FS for MS supporting the R-GSM band30814.2.10Reference sensitivity - TCH/AFS31014.2.18Reference sensitivit