温度工程E+H多点刚性热电偶.ppt
多点刚性热电偶,多点柔性热电偶,刚性多点热电偶-竖直测量,TM911,三层安全防护,Standard flanged connection with thermowellThermowell=First barrier,Safety chamber with removable head and lamination joint,Failure 1(a broken point on the thermowell),Second barrier:the process stops hereSafe operation also in fault condition no shut down necessary,Third barrier:the process stops hereSafe operation also in fault condition no immediate shut down necessary,Failure 2(a broken point between the flange and the tubes welding),开车后,三层安全防护,多点刚性热电偶,多点柔性热电偶,反应器用三点T型梁热电偶,Techincal data:design temp.:TS=190 460 C design pressure:PS=214 barg material:AISI 321 Junction Box CSA ceritified full radiographic examinationMultipoint CRN Approved!,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,CSA C22.2 certifiedjunction box with Class I,II,III,Div.1,2 Explosion proof,Flexible extension cable for very low ambient temperature up to-45 C,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,Special transition fitting for TC inserts fast replacement with IP66 degree of protection,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,Welding between compression fittings and process flanges dye penetrating and pressure tested,Welding between protecting thermowells and process flanges dye penetrating and pressure tested,反应器用三点T型梁热电偶,Welding on the bottom of protecting thermowells dye penetrating,pressure tested and radiographic analyzed,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,Welding between thermowell and T beam,反应器用三点T型梁热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,反应器用五点刚性热电偶,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,多点刚性热电偶-LDK冷氢化反应器,多点刚性热电偶-制氢装置,多点刚性热电偶-渣油加氢反应器,O.M.P.,O.M.P.,Solution OMP Technology,O.M.P.,Project:Contract:Ord.:Job:Mat.Req.:,Hydrogen plantJurgon Island(Singapore),Engineering:,SPA PROJECT1-15-0524A Units:DIMERPP0032/1.15.0524A94470 0524A-1611C/01;1611F/01,11米,多点刚性热电偶-英国,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,多点刚性热电偶-英国,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,刚性多点热电偶-竖直测量,TM911,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,三重安全防护,耐高压、高温卡套保证二次密封,安全腔室保证三次密封,严格测试的套管保证一次密封,出厂前质量控制,(氦气渗漏测试)(材质成分分析)(承压焊接部位X射线检测)(承压焊接部位探伤测试)(热电偶芯子的标定-意大利国家标定实验室授权)(材质证书)(出厂测试)(焊接质量认证及焊接流程认证)(遵循承压设备仪表认证要求)(防爆等相关认证)(尺寸检测)(热电偶热端X射线检测)(相关ASME标定)(详细设计图纸)(接线安装图纸),完善的质量监控、测试保证套管的长期安全使用保证芯子的准确连续测量,多点刚性热电偶-德国,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,多点刚性热电偶-德国,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,多点刚性热电偶-墨西哥,表面热电偶,多点刚性热电偶,三点刚性热电偶三点T型梁热电偶五点刚性热电偶多点刚性热电偶,多点柔性热电偶,多点柔性热电偶 安装支架,
